Recent content by ggood

have same QM R1T now for 7 mo and started them at the 44 but noticed typical sport tire "hopping" on first hard turn pulling out of driveway. that goes away by end of block...i pushed mine up to 46 for normal driving. agree if i were doing laps on a track etc id keep them at the min. 44...

Bbecker I have a 26 gen 2 QM after our 22 QM w Meridian. I installed the Tub Thumper per video and have a few small but imo huge adjustments. I set the amp at Kicker's manual instructions pretty neutral so as to not over do the bass and emphasize the fuller sound so the gain is at midway. I...

I’ve them few months they self retract and are good . I went with the smallest I found for Toyota . Only use one bolt but I’m not transporting major loads only mod I needed was to put a “flap” w two slices 4” into the bed liner to access spare pit

yes (there are a few older threads on this) on Gen 2 Tri similar thing happened on both left side door speakers. low or no sound. resets were no help. mobile came and he felt it was one or both related amps may be bad or not fully cycling on. he had spare amp for one of them but first tried a...

I did just that in Fall . the 26 QM Max G2, to me, was worth every penny in many many areas. the wider rear tires and added torque as well as much smoother tighter suspension. yes a few fit and finish alignments needed small adjusts. the 22 "rode on rails" but when you do very small RAD...

Im in 26 QM MAx and do find some quick RAD Tuner adjustments provide a much better ride. I followed a prev review from slashgear.com from a sports car engineer to create his version of a "Mid Engine feel"...he was trying to create mix of a Dakar and Mclaren (neither of which I have experienced...

think its too wide by a bit but close. they have nice stuff and accessories so thnx on the reference and pic. heres a pic of the sled with tracks and i added some hold downs. 15.25" vertical to bottom of latch strike and 12" wide rail to rail at the tray and 12.5 " inside the hold downs. I do...

got same pushed at us last eve. we already had .46 so same here on suspicion of some sort of fix. i have not tested all but did notice right away the RAD Tuner function seems less buggy. It did not save all modified settings. now does. still not able to find roads for UHF but will keep...

Sorry I was excited to be strapped in and not fully explained Derek at https://noworriesmfg.com/about/ I’ll ck dim side to side in am

Adding info here te strapping things in Sara was great to share the tracks are from L-track and friends , No Worries ;). Industries has perfect adjustable straps and tie off hooks . Great thing is they all set within the outer dim of the tray so no dragging gaudy tunnel opening ! Orders a few...

nice looking truck! we traded in for 26 R1t last month and same thing happened here. I checked the battery with a meter and it was reading 12+ so good there. Service recommended to keep it charged above 50% and plugged in until they checked it out. Mobile Tech came 2 days later and it all...

Totally agree on my end here as well. It’s perfect ! And so smooth operation I even found hue for few things under it Storing a wheel lug torque wrench and straps under there;0

Niftly 3d 'rs i just got and installed my console divider. nice job! i had not thought about the bottom of the main bin at all but your choice of a lighter yellow is perfect. i can finally see stuff in there :) ive tried 2 others and say you hit a home run on this. keep dreaming up new stuff...

It could if one wanted to attach things to the platform at edges or on the vertical walls of the accessory bins ;)

try Builtright Industries MOLLE Panels - Mounts and Attachments - BuiltRight Industries