Recent content by Soju1

I had this bug from the previous software update. After getting 2026.15 I haven’t seen the issue. I’d just have to touch one of the vents then it would turn on

I have the c6 rev tent with the platform to use as a RTT. The nice thing is that the tent and the platform can be separated so I can easily pull the tent off the platform and stake it to the ground and use it as a ground tent. It’s 84” long so it would stick off the bed an inch if you wanted to...

I think I’m due for a filter change. I’d like to participate.

Found this on a google image search. Someone got it to mount.

Size wise, from their website, sku: ibexa3 is closest based on what I measured. But since Kuat says it was a custom job, was curious if they made it shorter than 60” that ibexa3 is. Definitely the mounting is most important.

someone needs to go to Big Sky resort, find this truck and take measurements and pictures of how this is mounted

Freaking awesome! I’m in the same boat. I want something bigger without breaking the bank.

Anyone know what bed rack is on the truck in this photo? It’s from their Instagram stories from Big Sky Resort. Looks like a Kuat IBex but can’t really tell how it’s mounted. AI says it’s the Rivian oem bed rack.

I've used different lights with that adapter and it should work. Are you sure that its plugged into the trailer plug all the way. the spring cover sometimes will catch on the adapter and stop it before its inserted all the way in. You'll know it in when you cannot pull the adapter back out...

sorry to revive an older thread, but whats the special tool? how are you expected to hold both negative terminals and screw down the nut? I wish i had access to the service manual.

R1T roof shade here

Do you have a photo of this mod?

It’s the trim piece you remove to have access to the mounting holes. I used an oscillating multi tool to cut the trim. The video instruction goes over it.

Dm sent

I did mine on my own. But another set of hands to lift the thing would have been nice. Initial install was quick. Maybe an hour. Adjusting took me some time since I shimmed up one side and trying to get it dead center. I also wanted to put my trim pieces back so i took my time cutting it out...