Search results

I would love to see Rivian try to make this happen and help me like they did with the Gen 1 tax credit.

My mats are still getting moisture on them even after taking it in for service and having all the work done to fix it. I just dropped it back off yesterday to Rivian for the same issue. I would recommend taking a 1.5 hour drive and double checking your mats for moisture after the repairs are...

How is the grip on these compared to OEM Pirelli while cornering?

https://blog.comma.ai/010release/ Hopefully folks will test it and report back how we can upgrade safely. openpilot 0.10 August 21, 2025 6 minute read What comes after 0.9? After three years on the 0.9 series, we welcome you to the 0.10 series. openpilot 0.10 is defined by its entirely new...

I agree that tire engineers have a margin of safety built in. I personally tested that with the Pirelli XTM AT when I went over the max PSI. I always play it safe as much as possible and stick to 48 lbs - 50 lbs for the Toyo AT III EV in SL.

I personally try to keep the max pressure after driving below what is listed on the tire.

I run them at stock which is 48 psi cold and around 50 lbs hot around town. Once in a while I have to pull over after a long road trip where the exterior temp goes from cold to hot which increases tire pressure and then I have to let some air out when I go over the max psi.

Reach out to the dealer who sold you the warranty and see if they can help advocate for you. Steingold Volvo is who I purchased my contract with and they explained to me I would have to get prior authorization which I assume is by sharing the diagnostics / estimate print outs I get from Rivian...

I enjoyed the show in Austin where they let us take the electric vehicles on the track for a quick lap. I’ll have to check out the one in Dallas.

I did Llumar Air 80 and it was well worth it along with ceramic on the front windows and air 80 on the rear windows. I think the windshield cost around $250 - $300.

QUAD FTW

Good question. Thanks for your support. I sent you a DM for the final cost with RIV discount. R1T install is always on point even without magnetic pucks and fitted well. R1S has required three different version of material which all eventually made its way into the R1T model as well. It’s a...

I paid for an inspection ($160) which helped to catch many items (see screenshots from service center) that addressed the last bit of my noise concerns for suspension and that happened right before 30,000 miles. I plan to perform another inspection around 45,000 miles + a few road trips to see...

Some of the early on Typhoon Pro had a short communication pin and would not register on V4 cabinets. Reach out to Technical Support and let them know the issue you had / share your receipt. Customer Support : +1 (877) A2Z - EVEV Working days & hours : Mon-Sun : 10 AM - 5 PM Eastern Time...

I like this color combo. Spotted around town.

Used my R1S to load up sunshades and drop it off to UPS for forum members.

I've tried many different ones that end up clipping out / coming out like you mentioned at highway speeds around 75 miles per hour or higher. The specific set I built out with improved 3D scans for pressure fit, comes with plenty of extra clips and 2 of the anti-sag mechanisms to help when you...

I did this test last night using only 2 clips at the front and tucked under the headliner for the rest of the shade using pressure fit only. The sunshades stayed in place and did not clip out like other ones I've had clip out but it did flop around since I do not have the stability fix in place...

Here is the stock Pirelli with 22” bronze wheels. looks like the same to me as Gen 1 Pirelli Tires.

The range difference is probably because of the bigger battery and more efficient motors. 305” Michelin are super sticky / wide and not as efficient as the stock Pirelli.