New "Bolt-in" Flip-out Bed Extender for Rivian R1T -- NO Drilling, NO Screws into bedliner...pure BOLT ON! EV Sportline

[EV Sportline]

Came to ask the same thing as well... Based on the video, it looks like without those little spacers for the NON OEM cover; those of us with an OEM cover should be good. Would be nice to get confirmation before I hit buy though!

Please confirm @EV Sportline

"Can I access the under bed storage with the Bed Extender mounted."

If you have the shorter hardware installed and the bed cage is removed, the under bed storage can be accessed. If you have the longer hardware installed, the under bed storage can only be opened partially as the cradle hits the door (or remove the pin pivot point from the bracket).

Sponsored

 

[EV Sportline]

What are you using to hold the crossbars to the back of the bed? Is that a product you guys sell? Or the Soonish one?

We make our own, it's very nice....should be listed on our site later this week.

 

[Stainer85]

RIVFORUM

Thanks, tmmcgee

 

[harkco]

"Can I access the under bed storage with the Bed Extender mounted."

If you have the shorter hardware installed and the bed cage is removed, the under bed storage can be accessed. If you have the longer hardware installed, the under bed storage can only be opened partially as the cradle hits the door (or remove the pin pivot point from the bracket).

@EV Sportline

Will the shorter hardware work with the powered tonneau cover? If so, will it work if you have the Builtright side molle panels on the side of the bed?

 

[RivianXpress]

I sure wish it was a tad longer…

 

[CharonPDX]

I sure wish it was a tad longer…

I'd think you wouldn't want it with bikes back there anyway - it rotates in such a way that you couldn't load the bikes in unless you either completely removed it, or lifted the bikes up and over it.

 

[dulax]

I bought what looks like the same product from rough country, but never installed it because I wasn't sure I wanted to drill. Any chance these mounting brackets are compatible and I could buy them separately?

 

[EV Sportline]

@EV Sportline

Will the shorter hardware work with the powered tonneau cover? If so, will it work if you have the Builtright side molle panels on the side of the bed?

Yes, the shorter hardware = powered tonneau. There are no 'side rails' with the Rivian powered or manual tonneaus. The long hardware would work to clear the builtright side panels I believe, but let me check today.

 

[EV Sportline]

I bought what looks like the same product from rough country, but never installed it because I wasn't sure I wanted to drill. Any chance these mounting brackets are compatible and I could buy them separately?

We tooled our bed extender length / width / height specifically for Rivian - while other generic bed extenders look similar, they are not the same.

 

[Dmsail]

What is the maximum height while being flipped? I am wondering if it can be flipped under my Flated topper without removing the extender or topper. It looks like it would be too tall/long.

 

[EV Sportline]

Yes, the shorter hardware = powered tonneau. There are no 'side rails' with the Rivian powered or manual tonneaus. The long hardware would work to clear the builtright side panels I believe, but let me check today.

Confirmed, With longer bolts / spacer, the builtright side molle clears with room to spare

 

[Chrisy]

"Can I access the under bed storage with the Bed Extender mounted."

If you have the shorter hardware installed and the bed cage is removed, the under bed storage can be accessed. If you have the longer hardware installed, the under bed storage can only be opened partially as the cradle hits the door (or remove the pin pivot point from the bracket).

Very helpful with the pictures
This was the exact info I needed before I pulled the trigger on buying one.

 

[Marchin_MTB]

Nicely done @EV Sportline , I may need to drop some hints about this around Father’s Day.

Can we assume that the OE PTC will close over this when it is in the stowed position (flipped back into the bed)?

 

[EV Sportline]

Nicely done @EV Sportline , I may need to drop some hints about this around Father’s Day.

Can we assume that the OE PTC will close over this when it is in the stowed position (flipped back into the bed)?

Yes, power tonneau is good to go!

 

[harkco]

Confirmed, With longer bolts / spacer, the builtright side molle clears with room to spare

Is it no go with the shorter bolts?

Sponsored