Seat memory position

[RivBlue]

Hi All,
I know this has been covered but I’m gonna ask…
When I get into my truck, the seat ALWAYS reclines back an inch and a half and I have to put it back up, I like it as far “not”reclined as possible, so pretty much straight up.
I’ve set the roomy entry and exit before and I’ve turned it off now.
I turned it off again and even tried to set the roomy entry to all the way up and same thing. This last time it said “forget position “ so I clicked forget position.
I tried it again and when I unlock the truck and open the door, it reclines still!
It’s not that big a deal but I always have to manually un-recline it, very annoying as I’ll be driving and realize that the seat reclined and have to put it back up.
Any help for this?
I’ve tried a hard reset to no avail…
Thanks!

Sponsored

 

[Kenmecca]

Roomy has been broken for me probably 2 updates ago in my S. I actually turned it off anyways as it crushed my 86 year old dad's toes almost. I wont turn it back on until they add a feature that will turn off roomy when there is someone present behind it.

 

[dcramm]

Have you done the seat recalibration? Seems to have fixed my seat memory issue.

 

[Mobius1]

For me, it’s 50/50, my setting won’t be recognized and it will stay in roomy exit. I can not hit restore, I have to manually adjust and then still restore doesn’t activate, on Remember does. A couple times, I’ve had to park and jump out and it worked, but mostly not.

 

[RivBlue]

Have you done the seat recalibration? Seems to have fixed my seat memory issue.

How do I do a seat recalibration?

 

[moosetags]

On the center display, go to Settings; Vehicle; Service; select driver seat under driver position calibration and follow the instructions on the screen.

Brian

 

[downranger12]

For me, it’s 50/50, my setting won’t be recognized and it will stay in roomy exit. I can not hit restore, I have to manually adjust and then still restore doesn’t activate, on Remember does. A couple times, I’ve had to park and jump out and it worked, but mostly not.

I finally have this problem figured out. The restore to remember function I think is accomplished best by using firm pressure on the brake pedal, and hold until your seat comes up to the remembered position. If you get off the pedal too early, or use light pressure you are not going to get it.
I am uncertain if it is driven by air pressure or electric motors. Some of you may know. Please advise.

 

[Mobius1]

I finally have this problem figured out. The restore to remember function I think is accomplished best by using firm pressure on the brake pedal, and hold until your seat comes up to the remembered position. If you get off the pedal too early, or use light pressure you are not going to get it.
I am uncertain if it is driven by air pressure or electric motors. Some of you may know. Please advise.

Thanks, will try that out!

 

[RivBlue]

On the center display, go to Settings; Vehicle; Service; select driver seat under driver position calibration and follow the instructions on the screen.

Brian

Thank you so much, I’ll try that!

 

[RivBlue]

On the center display, go to Settings; Vehicle; Service; select driver seat under driver position calibration and follow the instructions on the screen.

Brian

I did the seat recalibration and it worked, thank you!

 

[moosetags]

You are quite welcome. This is what Rivian Forums is all about. We all need to help each other.

Brian

Sponsored