Search results

The eye bolt as well as the standard bolt will be supplied.

If you have a way to do the express shipping for less than $1000 for point to point, please let me know. I was told that only DHL accepts this kind of parcel and the oversize charge is around $200 for express.

I just cut out an opening manually on my cap and I think it works great. Please excuse my hand carving skill, there was not enough space for the router to sit flat for a clean cut. For water proofing, I got a 1/4" acrylic in place. For the production version, It will be a 2" by 1" cutout in...

The current solution would be to cut out a 2 inch hole at the exact location and replace it with glass/acrylic. This is doable in the current production but will push the date back a little bit.

I think that is possible. This can probably be changed later this year.

The Depth is 10 inches

The roof rails can be removed from the whole assembly. We will just need to provide longer bolts. The sliding window can also be removed.

The storage box will be accessible once you open the side door.

The box is only accessible from the outside of the side windows. here is an image of the roof.

There are cutouts for the buttons, but you will need to open the door first.

The aero changes dramatically even if the cap is just raised by an inch or two which affects the efficiency by quite a bit. I recall install the crossbar on the roof and my consumption went from 2.3mile/kwh down to ~ 2.1mile/kwh. It may not seem significant but every so often you needed that...

The Roof Rail is fixed, but it can hold 450lbs static load. I think it's best to add a platform for a more uniformed load. I can probably put my rack platform up there later to see how it looks.

That's a very good idea of getting the eye bolt instead. It just needs to be M10 60mm. For the production version, the two middle mounting point will be shifted so that it aligns with the bed.

Yes this will block the bed camera. efficiency wise, I do not see a quantifiable difference, which I assume it will be within 5% since it is mounted flush to the truck. On a good day ~80F, I can get about 2.3miles/kwh. local driving more towards 2.5miles/kwh. On a cold day ~28F, I am getting...

Here is a picture of the crossbar on the roof. It will be leveled by adding a platform, and also goes above the antenna.

The cap is at the same level as the roof so I don't think the rack lines up with the crossbar, but I think you can add platform to make it level. I am going to take a picture later today.

Update 06/04 Production is completed for the last batch. Email has been sent. The next production will be submitted in the next few days and production will begin about a week after. We will continue to accept orders. The current batch of production is estimated to be mid January...