shrink
Well-Known Member
- Joined
- Feb 16, 2021
- Threads
- 102
- Messages
- 1,389
- Reaction score
- 2,712
- Location
- Phoenix, AZ and Kailua-Kona, HI
- Vehicles
- '23 R1S Quad x 2; '26 Gen 2 R1T Quad Launch; '25 Ioniq 5; '24 Jeep Cherokee
- Thread starter
- #1
I just installed the Abstract Ocean Satin Black emblems on my R1T and R1S so I have the OEM badges for sale.
Please note:
1) R1S letters currently have satin black vinyl applied. You just peel to remove. R1T letters have glossy black vinyl. I’m going to leave on to protect OEM finish. It’s easy to remove
2) The backs of the emblems still have some VHB tape residue as pictured below. You’ll need to use some GooGone to remove the rest and then apply new VHB tape strips to install.
3) I saved the Abstract Ocean installation/spacing templates for the R1S lift gate. I have one template for the doors as well.
4) On the R1S set, I peeled the vinyl off the hood/C-pillar compass so it’s the OEM finish, but there’s still a little adhesive residue that will need to be removed.
5) R1S set has only one (1) compass from the hood. I kept the OEM C-pillar ones installed and applied yellow vinyl. R1S has a compass emblem on the hood and one on each C-pillar for a total of 3.
6) One two of the A's in the door RIVIAN letters, part of the yellow accents broke off, but it's clean break and can easily be glued back together. Putting more VHB tape on the backs will help as well.
$200 per set shipped in the US.
Please note:
1) R1S letters currently have satin black vinyl applied. You just peel to remove. R1T letters have glossy black vinyl. I’m going to leave on to protect OEM finish. It’s easy to remove
2) The backs of the emblems still have some VHB tape residue as pictured below. You’ll need to use some GooGone to remove the rest and then apply new VHB tape strips to install.
3) I saved the Abstract Ocean installation/spacing templates for the R1S lift gate. I have one template for the doors as well.
4) On the R1S set, I peeled the vinyl off the hood/C-pillar compass so it’s the OEM finish, but there’s still a little adhesive residue that will need to be removed.
5) R1S set has only one (1) compass from the hood. I kept the OEM C-pillar ones installed and applied yellow vinyl. R1S has a compass emblem on the hood and one on each C-pillar for a total of 3.
6) One two of the A's in the door RIVIAN letters, part of the yellow accents broke off, but it's clean break and can easily be glued back together. Putting more VHB tape on the backs will help as well.
$200 per set shipped in the US.
Sponsored
