Ordered new 20” wheel with +48mm offset from Tirerack

[SoCal Rob]

Worked great today but I might need a little more lift for some of these obstacles.

From this angle it looks like your truck got two tired so it’s resting.

Sponsored

 

[Spaceball1]

From this angle it looks like your truck got two tired so it’s resting.

more like five-tired

*rimshot*

?

 

[SoCal Rob]

more like five-tired

*rimshot*

?

That kills the humor. I know my word play can be very subtle or obscure, but I thought two tired / too tired was one of my easier ones since I added resting, no?

 

[Spaceball1]

That kills the humor. I know my word play can be very subtle or obscure, but I thought two tired / too tired was one of my easier ones since I added resting, no?

Ahh yes, I missed your spelling of “two”. Take my dad joke membership card away; it’s too early for me apparently ?

 

[WSea]

There is a cheaper option: https://www.amazon.com/dp/B09W81D636?psc=1&ref=ppx_yo2ov_dt_b_product_details

No programming is needed, just install and use.

I can confirm these TPMS work great with no programming. Can also confirm that all i did was give them to discount tire with new wheels for install. Started reading psi after about 20 minutes of driving.

 

[shap]

I can confirm these TPMS work great with no programming. Can also confirm that all i did was give them to discount tire with new wheels for install. Started reading psi after about 20 minutes of driving.

What tire did you install? I thought of buying a Pirelli Scorpion AS Plus (275/60/20R) as a replacement for my 21". They are 115H, so I guess Discount Tire will not want to install them...

 

[Spaceball1]

What tire did you install? I thought of buying a Pirelli Scorpion AS Plus (275/60/20R) as a replacement for my 21". They are 115H, so I guess Discount Tire will not want to install them...

The original Rivian tires for the 22s were 115 load rating. They did switch to 116 at some point though. But technically 115 still exceeds the load rating of the trucks. (Technically could go down to 113 by my calculations, though that’s at max air pressure).

Even the H speed rating is enough for these trucks, so not sure why that’s a huge issue for them. I’m assuming their system shows 116 as being the stock tire load rating and caution anyone going below that.

 

[WSea]

What tire did you install? I thought of buying a Pirelli Scorpion AS Plus (275/60/20R) as a replacement for my 21". They are 115H, so I guess Discount Tire will not want to install them...

https://www.rivianforums.com/forum/threads/ko3-tires-installed-on-rivian-r1t.19280/

 

[chrismc]

Any reason these wheels wouldn’t be a good match for Nokian Hakka LT3s? https://simpletire.com/brands/nokian-tires/hakkapeliitta-lt-3#v=1&tireSize=lt275-65r-20

 

[Adventusaurus]

What tires did you end up getting?

I got some 27/60r20 Nokian Nordman 7 studded tires for pretty cheap on eBay from SimpleTire. Less than $900 delivered.

The stock 21” All seasons were pretty decent in snow last year, but I tend to travel the Sierra passes pretty late at night and hitting a patch of ice on anything non-studded is pretty unpleasant.

 

[Adventusaurus]

i have have LA silver as well..did you install your new wheels? i am thinking to order as well..with 20 A/s tires. let me know
thanks

Got the tires mounted and balanced today. Not installing on the truck for real for a few months yet. I was gonna shove a wheel on to check for clearances but others have checked that box already. I can roll a wheel out some time and set it in place by the truck and get a few photos .

 

[Adventusaurus]

Any reason these wheels wouldn’t be a good match for Nokian Hakka LT3s? https://simpletire.com/brands/nokian-tires/hakkapeliitta-lt-3#v=1&tireSize=lt275-65r-20

Nokian’s recommendations are here https://www.nokiantires.com/rivian/...MI-c_do8rEgQMVUPSUCR2GVgzIEAAYASAAEgJpX_D_BwE

The LT3 are a very high load rating and may have very stiff sidewalls. Unless you are hauling or towing a lot, might be overkill and not the most compliant ride?

 

[Robotpedlr]

Got the tires mounted and balanced today. Not installing on the truck for real for a few months yet. I was gonna shove a wheel on to check for clearances but others have checked that box already. I can roll a wheel out some time and set it in place by the truck and get a few photos .

Pictures or it didn’t happen.. lol

 

[Adventusaurus]

Pictures or it didn’t happen.. lol

Well here is a mounted Nokian, but I doubt anyone cares about that . Will see what I can do about taking one next to the truck in the next few days.

 

[WSea]

Well here is a mounted Nokian, but I doubt anyone cares about that . Will see what I can do about taking one next to the truck in the next few days.

Didn’t realize another wheel was behind and thought they were spinners

Sponsored