Sponsored

Search results

  1. LEVEL 3 Charging problems

    I will check that if there is a next time but when the Rivian arrived at the service center I pulled it into level 2 charger bay and it started charging right away.
  2. LEVEL 3 Charging problems

    I already have a Lightning (Ford) and my wife loves driving it!!! Soooo Big Cadillac ride and quiet.
  3. LEVEL 3 Charging problems

    I was following the suggestions of the service operator. I usually never go below 10% SOC
  4. LEVEL 3 Charging problems

    Another thought was the lock mechanism that locks the charger head in the port, so I was careful to push in the charge plug fully. Remember I tries at least 10 charger stands in those few hours. Another point is that i was getting the flashing red light after failure to charge each time...
  5. LEVEL 3 Charging problems

    Good point but I was down to 4% and don't use the scheduling.
  6. LEVEL 3 Charging problems

    2 months have passed since this happened. No 12 volt notices.
  7. LEVEL 3 Charging problems

    Used the Rivian adapter sent to me. Yes Hard reset about 8 times with a wait before charging. There was a 40 minute lapse of time from Coco Junction to Inyokern so that should have left enough time for the hard reset to finish.
  8. LEVEL 3 Charging problems

    I have a Launch Edition 2022 R1S Quad. Last year, it would not charge at either Rivian or Electrify America Level 3 chargers along Hwy 395 between Los Angeles and Mammoth Lakes. This was in August 2024, and I didn’t have the adapter yet. Since it’s about 300 miles to my house, I needed at least...
  9. Continual suspension/alignment issues

    I have a gen 1 R1S with the same problem from the factory. Been in 4 times for alignment and soon was out of alignment. I did notice that about 2 months ago with an update the vehicle started to track closer to straight just before the last alignment and I cancelled the appointment because they...
  10. Connect+ now REQUIRED to use native apps (tidal,audible/spotify)

    I always have to reconnect to my hotspot when I get into the Rivian. It’s like the computer forgot my hot spot. It choses my home wifi every time. So before I put into drive I hit the snowcone signal icon then open setting and turn off hotspot and turn on again, then chose hotspot on the drop...
  11. 📸Post Your August Rivian Photos Here! (RWCev ROTM Giveaway Contest!)

    Working Rivian…Lifting a 30 inch gas kitchen range into the belly of the R1S. Fits with second row up.
  12. Join Redtiger’s Always-On Testing Program: Test the F17Elite Flagship Dashcam!

    Interested in testing the F17 Elite. I have numerous cars but the Sprinter Winnebago Revel is the one I want to install it on. The Rivian R1S and Tesla Model 3 I have seems ok with the built-in software and cameras but the Sprinter has nothing but a cheap dash-cam I installed 2 years ago. I have...
  13. CA or NM for the R2 Reservation List?

    So I went back and looked at my paperwork on the purchase. Before it was ready to be delivered, they ask me where I wanted to pick it up. I told Rivain it would be New Mexico. I originally thought they would deliver the car in New Mexico to my house. They said they would take care of the...
  14. CA or NM for the R2 Reservation List?

    In NM you will pay 4% sales tax on a new car and registration is about $54 a year with a 5% discount for a 2 year reg. Plus you can have a red and green chile license plate for no extra cost !!! I live in Corrales, NM and have a house in LA but most 90% of my income is generated in NM and I pay...
  15. New set of Chilewhich mats SoCal

    What is the price and what is the measurement front to back to tell if it's the same for the R1S?
  16. R1S Camper Shelf Build (replacing 2nd row seats)

    That is the foam board that I used in all five windows that just kind of pushes into place. I went ahead and painted it the same color as close as possible to the launch green. I also added an electric mattress. You can see the controller on the left side. That’s for below freezing temps and...
  17. R1S Camper Shelf Build (replacing 2nd row seats)

    I would install some foam on the edge of the top panel to protect the 3rd row upholstery from abrasion. Second I would install a sheet of plywood in the center as a stop for the bins and it would also become a strong back for the platform from moving. Great idea for traveling. I made window...





Top