Search results

I played around in the slicer and added a 66x15x1.8 "cylinder" and then told it to only print perimeters ... this would work with a Kleenex box right under it! :)

Ha! You could totally add an open slot in the base and access Kleenex from below … fits perfectly under this.

Oh, and I can also confirm that the NACS adapter does fit on the bottom below this unit. The adapter is 122mm long and the bottom of this organizer sits at about 135mm above the floor (I just measured). If you want an extra tall cavity but just some top storage, you're probably better off with...

Haha. I'd love a better solution for the second row for kleenex for the kids :) I have kleenex in the front storage area on the floor for my wife and I.

It wouldn't be hard to make one extra deep, but I wonder about the usefulness. It would also be too tall for most printers. The base model is already about 193mm tall and sits about 125mm off the floor. One of my goals was to make it super easy to remove to get access to the very bottom, and...

I just added a model to hold 4 keys too, as I needed a better place to put my crossbar key.

I wanted to share that I've published a model of my take on the OEM console organizer. I started drawing it up because it was out of stock by the time I went to buy one, then the project morphed into a my own take that allows for more customizations. The printables page has more details on...

I'm curious how well the smaller top tray stays put while driving. Does it have some rubber on the underside or anything to keep it from sliding forward/back? I've been playing with my own variant of this 3d printed and mine slides all over the place since it's just plastic on plastic. I'm...

The specs for the power bank says it can be charged via the door OR USB-C ... with 0-100% charge times of 5.2 hours in the door and 3.2 hours via USB-C. So it actually charges almost twice as fast via USB-C. I just checked the fit of the torch in the center console which should be the same...

Actually, $45 isn't bad... I've actually modeled up a replica in Fusion 360 ... and will likely post it on printables once I feel like it's ready ... and it's about $10 just in filament alone (~300g) for the two pieces. Also, that doesn't include the rubber inserts and 14 hours of print time...

Yep. I published a .3mf that includes the settings I used to print it, along with the logos. Those can be removed or modified in the slicer. You could also remove the clips on the back if you don't think you'd use those and instead just want a clean bracket. Note that due to the shape of the...

@RWerksman sells several of the cup holder models at https://opensourceev.com/products/nextgen-aux-cupholder Its up to him if he decides to add any of these new models. I know he does a fair amount of testing himself before releasing anything. Yes, you could attach a cup holder or cup clamp...

I created some Rivian Cup Holders earlier this year and recently was asked about creating a version of the cup holders without the bottoms, specifically for a giant 64oz water bottle with a silicon sleeve, measuring 133mm in diameter. When attached to the front storage area, this would let...

I'm assuming Apple Music is also tied to a single profile just like Spotify, for now. I know they've mentioned several times that eventually they'd be tied to the driver profile, but I find it hard to believe they'd enable that here. I hope I'm wrong and my wife and I could use our own...

Well that's just brilliant. I don't know how I didn't run across this before. I might have to try this out and make ones for the sunroof and windshield. :)

Oh, interesting. Yeah, if it starts to smell or anything like that we might have to re-do this with a different material. Thanks for the heads-up!

I've wanted some black-out shades I could use while camping but didn't want to spend $100s on something like this. I've been thinking about making my own for a while and finally got around to it when I ran across a 6'x9' roll of indoor/outdoor carpet at Costco for all of $18. I figured it...

I've never used Carplay myself but I do understand the want by a lot of folks. I was curious about the EV/Carplay integration and found: https://support.apple.com/guide/iphone/set-up-electric-vehicle-routing-iphc5e3a4b4b/ios Apparently only Porsche Taycan and Ford Mach-E/F-150 support it so...

Hah. I watched the ending part, which was intriguing enough to go ahead and watch the whole thing and just cracked up at 10:35 when the fingers slowly come into frame to straighten the mixer on the table ... then slowly slide away. For some reason that just cracked me up. Thanks to this...

Also reads as "The Rivian" though, which is how I first read it... nice.