Search results

So help me out the speakers labeled as “Heights” they do what?

I have also noticed I only have significant sound out of the rear door speakers regardless of the fade/balance settings. Not sure what the issue is as of yet. Not 100% sure there are speakers behind all the grills??

Wow those look great. Now if I could find a way to remove the gorilla tape I used. . That stuff really sticks.

Here is what I did and would recommend. Even though you have a 200 amp main panel that has all the breaker slots used it is very unlikely you are using the full 200 amp capacity of your electrical service. You would need to calculate all the loads that run together and their individual ampacity...

Just a thought before ordering might want to verify a standard vehicle lift will allow for the drop on these running boards. I installed EV sports boards and had this concern but learned today they work fine with Rivian vehicle lifts

Two responses Probably a thrust washer Appreciate the info on the compatibility with the Rivian lift.

On certain vehicles they are adding what I will assume is a spring washer to the half shafts and re torquing retaining bolts to a higher limit. I will advise exact repair after tomorrows visit

Taking truck into SC for half shaft recall tomorrow. Hoping the new running boards clear they’re vehicle lift without issues. Anyone else had Rivian lift their trucks with the new boards installed

I am 99.9% sure Tesla wall connector can only communicate with other Tesla wall connectors. That also have to be the same generation of charger to communicate. I have two different generations of Tesla wall connectors and they will not talk together

Bought my R1T used with 100 miles on it last year. I was able to get the name of the Rivian guide associated with initial purchase but after 10 days and no return calls I called the service number at 855-748-4265 who had me set up a calendar appointment on their system with the guide and then...

Bummer you can’t finish the install today but your plan to involve EV Sportline and Rivian is the best and safest for your truck good luck

Great suggestion I was assuming the bolt was damaged when it may be the bit. Also what about the possibility that you had a T55 bit and not the required TP55 bit

I see ev is offering to assist. Let them help Just general fyi There are a couple of ways to remove bolts that are stripped. Sometimes a tool called an easy out may work but those frame bolts are in there pretty tight the old tried and true method used with ICE vehicles when you could...

When you say the bolt is stripped are you saying the torx bit has spun in the bolt and ground out the contact points for the tp55 torx bit

I believe this is it

Just an FYI a hard reset can take 30 minutes or so to completely reset all system. Manual states only perform a hard rest once per hour. Basically don’t reset two or three times

Something you could do on your own if you are comfortable. Open the box with the aluminum to copper splice. Turn off power first would be the safest way to do this. If you can safely leave that box open turn the breaker back on and begin charging your truck. Using an optical non contact...

If your circuit breaker at your panel is labeled Al/cu. Then it can handle aluminum and or copper wire. That said running copper wire back to the main panel is always best. But a splice designed to connect aluminum wire to copper wire with the use of no ox on the connection. ( non oxidizing...

Add me as another client once you have the final product. Thanks for tackling this this for us