Best Weather Proof All Weather Floor Mats?

[SSteveEV]

Same results on my end. Don't get why they have the tech for the pin downs but only use them in one row. Either you buy into clipping them down or not wanting a weep hole for fluid, but doing both is odd.

Also have the wrinkle and half coverage of the foot rest. Could have gone another few inches up for the cost, now I'll just knock stuff behind the mat. Sub area wasn't great but won't bother me as much as the rest.

Sponsored

 

[Rousie13]

Are all of the pictures from the X-Act or Weatherbeater mats? I'm assuming these are pictures of the X-Act mats, so I'm wondering if there is any different fit between the two types of mats.

 

[CommodoreAmiga]

Don't get why they have the tech for the pin downs but only use them in one row. Either you buy into clipping them down or not wanting a weep hole for fluid, but doing both is odd.

I would guess it has to do with liability. They probably don't like using the clips (hence they don't, in the rear) but they also don't want someone to get hurt (or get sued) when a floor mat slips over/under the brake/gas pedal and someone can't stop or gets unintentional acceleration.

 

[Prime]

Someone on Etsy making these. Looks pretty clean wonder if it would fit the husky ones too (shape looks similar).

https://www.etsy.com/listing/132306...5qiU4L6fsgmTzXXF__JwhEbByPyZcfioaAgIaEALw_wcB

 

[CommodoreAmiga]

Someone on Etsy making these. Looks pretty clean wonder if it would fit the husky ones too (shape looks similar).

Intentional or accidental joke?

 

[Yellow Buddy]

Are all of the pictures from the X-Act or Weatherbeater mats? I'm assuming these are pictures of the X-Act mats, so I'm wondering if there is any different fit between the two types of mats.

Xact on mine.

 

[Leonbmx]

Someone on Etsy making these. Looks pretty clean wonder if it would fit the husky ones too (shape looks similar).

I contacted them and they added the Husky version (5x1 Square)!

https://www.etsy.com/listing/1337038615/rivian-husky-liner-replacement-domed?variation0=3000100789

 

[Brewbud]

My Weatherbeater (not Xact) mats arrived Friday but I didn't get a chance to install them until today. The fit definitely could be better. The front snaps were a little off side to side in the front. I had to really stretch them to get them to snap into place. They actually fit better against the inner console before I snapped them in. Like others have said, the area around the subwoofer is a miss by Husky. My biggest concern is they put the spikes in places they shouldn't have. If I keep them, I will be snipping off all the spikes in areas the liners cover hard plastic (thresholds and the lip on the center console).

 

[Rousie13]

My Weatherbeater (not Xact) mats arrived Friday but I didn't get a chance to install them until today. The fit definitely could be better. The front snaps were a little off side to side in the front. I had to really stretch them to get them to snap into place. They actually fit better against the inner console before I snapped them in. Like others have said, the area around the subwoofer is a miss by Husky. My biggest concern is they put the spikes in places they shouldn't have. If I keep them, I will be snipping off all the spikes in areas the liners cover hard plastic (thresholds and the lip on the center console).

Good information.

I’m now debating if I should try to cancel my Husky order and just keep my Rivian mats for now.

 

[R1TFTW]

Enough of Husky. Back to TuxMat… anybody make it to Canada for measurement?

 

[DTown3011]

Good information.

I’m now debating if I should try to cancel my Husky order and just keep my Rivian mats for now.

Ya not super impress with these photos and the Husky fit. I’ll probably keep the Rivian mats and then buy WeatherTech once they have a version for R1T.

 

[COdogman]

Those Husky mats appear to fit about as well as the set I had purchased for my Tacoma a few years ago. I like the material and the look and the price but the fit is just off in a couple places. I will probably wait for the next one… Those 3D PimpmyEV mats linked to earlier in this thread look really nice, but $$$$. Might be worth it though??‍

 

[SSteveEV]

Enough of Husky. Back to TuxMat… anybody make it to Canada for measurement?

Sadly no, the 3 possible 6 hour round trips was too much for a free pair of mats for me. Last I heard on 10/17 they hadn't started the 2 month prototyping process.

 

[Rousie13]

Enough of Husky. Back to TuxMat… anybody make it to Canada for measurement?

I love our tuxmats in my wife’s XC40 Recharge.

 

[Rousie13]

Well I just called Husky to cancel my order and they told me I'm expected to actually receive the mats today.....it still says processing online and I never got any shipment notifications. So I guess I will get the mats and try the fit, then decide if I want to return the Husky mats or sell my OEM mats. They said I can return them for free if I decide to do that....we'll see if that pans out if I decide to go that route.

Long story short, I guess I will see today how the Weatherbeaters fit compared to the OEM mats.

Sponsored