Custom Made Rivian R1T Truck Cap Topper (Autofitpro) Group Buy - Interested?

[sfkirill]

I have one installed in the east bay - ended up using the original brackets first while I decide whether or not to use the tonneau cover and lift the topper a bit so it clears the slats. Took a while to install - some issues we ran into:

- the panel misalignment made it so that one corner of tailgate wouldnt close without rubbing, had to put some washers in the bracket to raise it enough to clear

- theres some pretty hefty gaps in the sides and will definitely need to figure out a way to seal the bed camera cutout as it sticks above the truck top so it'll definitely take on a lot of water

- didnt come with mounting hardware to actually lock it into the bed. If you happen to decide to use eyebolts to have functional tie downs, you won't be able to use the spare compartment so it's a pretty big tradeoff to make (unless you want to cut out the plastics). I can reach in just enough to grab my tow straps in there but no chance im pulling anything else out.

looks good though!

Sent you a DM, but copying here too:

I am thinking of ordering the same topper for my 2023 T. I am in Pacifica. Any chance we can meet up in the next few days so I can take a quick look?

Sponsored

 

[Autofitpro]

Sent you a DM, but copying here too:

I am thinking of ordering the same topper for my 2023 T. I am in Pacifica. Any chance we can meet up in the next few days so I can take a quick look?

I sent you a DM

 

[sfkirill]

Order placed!

 

[Autofitpro]

Order placed!
[/QUOTE

I added to your order to the list!

 

[smwwilson]

Got mine today! Very sturdy. Definitely got less hardware than necessary. Has this happened to anyone? I didn’t get the bolts/ nuts to attach to the brackets that attach to the cap. And didn’t get the nuts/bolts to attach the cubby to the cap.

 

[DIYrrr]

Are they shipping? Just making sure I didn’t miss an email with steps after the deposit.

 

[smwwilson]

Are they shipping? Just making sure I didn’t miss an email with steps after the deposit.

I got a text scheduling delivery a couple of days ago

 

[Autofitpro]

Are they shipping? Just making sure I didn’t miss an email with steps after the deposit.

This batch is expected to be completed this weekend. I will send out photos to all once it is ready to ship. After that, it will take about 45 - 50 days depending on the location.

 

[Autofitpro]

Update 04/18

The truck cap is ready to ship and I will have an image on Monday and send to everyone.

 

[stefprez]

@Autofitpro Are you able to provide installation instructions for the mounting straps by chance? The included instruction booklet didn't have any of those details in it.

 

[Autofitpro]

@Autofitpro Are you able to provide installation instructions for the mounting straps by chance? The included instruct

ion booklet didn't have any of those details in it.

The mounting bracket looks like this.

 

[stefprez]

The mounting bracket looks like this.

That's helpful! I was wondering if I needed to uninstall the tie-down anchors. Thanks!

 

[Autofitpro]

That's helpful! I was wondering if I needed to uninstall the tie-down anchors. Thanks!

Yes you will need to remove the existing bolt and use the m10 60mm eyebolt to secure the cap.

 

[Autofitpro]

Update 05/03

The current order has been shipped out. As for the next round, we will just need one more to start the production if anyone is interested.

 

[B&TR1T]

The cap is at the same level as the roof so I don't think the rack lines up with the crossbar, but I think you can add platform to make it level. I am going to take a picture later today.

no
Very nice! Will be looking forward to placing an order.

Sponsored