Rear cargo liner for R1S?

[citizen]

I found one that fits very well to R1S (3rd row down) at temu. Link below.

https://www.temu.com/goods.html?_bg..._1697043046908_fveetihzd9&refer_page_sn=10045

Think there's quite a few on Amazon (I'm a big Temu fan as well) that are similar in price. I have the LinerX cargo cover only. But for the times my dog is in the back (she sheds a ton), I wanted something that covers the whole area more fully.

Ordered the following off Amazon, was tough to find a lighter color (for the dog's hair color) that also had the raised sides: https://www.amazon.com/dp/B083DCTPJP?ref=ppx_yo2ov_dt_b_product_details&th=1

Here are the other ones I considered w/ raised sides:
https://www.amazon.com/gp/product/B00Y1YF63W/ref=ox_sc_saved_image_9?smid=A3CVJKO0YW40TC&psc=1

https://www.amazon.com/gp/product/B08LPJB9KK/ref=ox_sc_saved_image_7?smid=A2ADQB6A1CW2WI&th=1

Sponsored

 

[zwhite304]

Think there's quite a few on Amazon (I'm a big Temu fan as well) that are similar in price. I have the LinerX cargo cover only. But for the times my dog is in the back (she sheds a ton), I wanted something that covers the whole area more fully.

Ordered the following off Amazon, was tough to find a lighter color (for the dog's hair color) that also had the raised sides: https://www.amazon.com/dp/B083DCTPJP?ref=ppx_yo2ov_dt_b_product_details&th=1

Here are the other ones I considered w/ raised sides:
https://www.amazon.com/gp/product/B00Y1YF63W/ref=ox_sc_saved_image_9?smid=A3CVJKO0YW40TC&psc=1

https://www.amazon.com/gp/product/B08LPJB9KK/ref=ox_sc_saved_image_7?smid=A2ADQB6A1CW2WI&th=1

When you receive this one, do you mind posting a pic of how it fits? I have a yellow lab that sheds a ton and would also rather have a lighter colored option so the hair doesn't stand out as much. Thanks!

 

[citizen]

When you receive this one, do you mind posting a pic of how it fits? I have a yellow lab that sheds a ton and would also rather have a lighter colored option so the hair doesn't stand out as much. Thanks!

Test fit below, it has suction cups for the sides, rubber backing underneath to prevent sliding around and is more than large enough.

However the front corners don’t zip up which is annoying. Looking at alternatives or might sew those two corners together.

Best alternative is this one but it's double the price. Off Temu, they only have the tan version for half the price (similar in price to my original option). And eBates/Rakuten of about 13% off on top of that.

 

[Matthuw]

I ordered the LinerX on Saturday to see how it looks.

I'm a little bummed that their website has what's apparently an automated but not real "if you order within X time your order ships same day" (here's an example for another Rivian product, just for the purposes of showing the website feature).

I ordered on Saturday before that clock expired and I didn't get shipment notification until today (Monday) at 10:40am Pacific Time. I'm not in a rush so that's fine, but I'm posting here in case the LinerX people are watching... if you promise something you should hold to it, especially in this day and age of very well handled logistics [turns to look at Amazon]...

Yep, I ordered the @LinerX mats at the beginning of Oct also. Got a shipping label creation notification about a week later. Still waiting. Was told this week, after contacting them for a second time that the cargo liner should be ready to ship in 5-7 days…same thing it said when I ordered. Patiently waiting for what I hope will meet my protection needs.

 

[mkg3]

Bit of a hack but it works.

The rear cargo is Kagu custom fit by 3D Maxpyder:
https://www.amazon.com/3D-MAXpider-Custom-Compatible-2022-2023/dp/B0C9NSJQPF

Tailgate and the 3rd row is Kagu universal cargo cover Large cut to fit:
https://www.amazon.com/dp/B07N1HXW2V?psc=1&ref=ppx_yo2ov_dt_b_product_details

The universal mat was cut to fit two pieces for the lower tailgate and is attached using velcro strips. The second image shows the overhang when the gate is closed. It was by choice. I could have trimmed the lower gate piece to not protrude beyond the height of the lower gate when closed, but it would meant to expose the edge of the upper panel flush with the mat. Since the loading and unloading and setting things on the lower gate will be high traffic area, I decide to have an overlap and not expose the panel opening/carpet. It's a tradeoff.

I originally bought the universal cover just for the lower gate, but just so happens that the remainder of the universal mat was large enough to create near full coverage protection for the 3rd row down. Just needed to trim the width to match each seat back of the 3rd row. The cover is just sitting on it but the back of the Kagu mat is such that there is a lot of friction and will not slide very easily. Since I don't haul things much, this will suffice until someone can figure out a very good custom solution to the 3rd row seat back cover that can stay attached folded up or down.

The 3rd image is what the universal mat looks like initially. Its 55L x 45.3W and all the ridges and lines make it easy to figure out what part to use for where.

 

[EchoDelta]

[tagging for future reference- Thinking of cutting up my linerx to do a similar thing]

 

[Nine_One_Six_R1S]

Yep, I ordered the @LinerX mats at the beginning of Oct also. Got a shipping label creation notification about a week later. Still waiting. Was told this week, after contacting them for a second time that the cargo liner should be ready to ship in 5-7 days…same thing it said when I ordered. Patiently waiting for what I hope will meet my protection needs.

If possible do you mind updating how the Liner X works for you when you get it?

This is the only option that allows full coverage of the floor trunk when 3rd row is down right? I have not been able to find any.

Most of the time my 3rd row is down so looking for something that covers all that floor when I go play around in the mud/snow

 

[Nine_One_Six_R1S]

Bit of a hack but it works.

The universal mat was cut to fit two pieces for the lower tailgate and is attached using velcro strips.

what did you use to cut this? Wasn't any hard?

 

[Seoras]

This one was already mentioned in the thread but there were no pictures so adding here. This is the 4knines Multi-Function Dog Split SUV Cargo Liner in Large 52" x 86" size. It's basically the same as the Temu and Amazon ones. It does have zippers so that you can fold down different parts of the second row bench seat. Not sure how useful that will ultimately be but I can see folding down the middle as potentially helpful.

 

[Matthuw]

If possible do you mind updating how the Liner X works for you when you get it?

This is the only option that allows full coverage of the floor trunk when 3rd row is down right? I have not been able to find any.

Most of the time my 3rd row is down so looking for something that covers all that floor when I go play around in the mud/snow

The 3 piece system covers NEARLY everything. There are still gaps between each seat since they can fold down independently, and there is an “overlap/gap” at the lip where the 3rd row folds down. If you lift the trunk board into the incline position, everything lines up nicely. I’m overall happy with the coverage, it’s worked great with the stroller, dog, and kids going in out. I ended up folding the tailgate flap under the mat so it’s out of the way.

 

[BeanEW]

I have the Weathertech one; although it is not a perfect fit but I'm glad I went with Weathertech after I looked at some of the pictures.

 

[derichio02]

Just ordered this set and will report back. They have good reviews in other vehicles. I have the third row up a lot and wanted something I could use when down as well. Seems they are two separate mats. If it’s good I’ll use this until something better comes out that works when the third row is in all positions. Very surprised it’s not out yet but based on volume it may not be cost effective for businesses.

TOUGHPRO Cargo/Trunk Mats Accessories Compatible with Rivian R1S 3rd Row Folded Down All Weather Heavy Duty (Made in USA) Black Rubber 2022 2023 2024 https://a.co/d/5qI4ntk

 

[mkg3]

what did you use to cut this? Wasn't any hard?

Straight edge to guide and a snap-off box cutter like this:

Don't forget to measure both ends of where you are cutting to assure proper fit.

It's not hard but does require bit of thinking through which part of the universal mat to cut for which part of the vehicle. The material cuts clean and easy.

3D Maxpyder now makes 3rd row seat back liner. I might replace my version with this.

https://3dmatsusa.com/collections/c...seatback-protector?model=MjAyM0BSSVZJQU5AUjFT

 

[derichio02]

Straight edge to guide and a snap-off box cutter like this:

Don't forget to measure both ends of where you are cutting to assure proper fit.

It's not hard but does require bit of thinking through which part of the universal mat to cut for which part of the vehicle. The material cuts clean and easy.

3D Maxpyder now makes 3rd row seat back liner. I might replace my version with this.

https://3dmatsusa.com/collections/c...seatback-protector?model=MjAyM0BSSVZJQU5AUjFT

Oh wow. I wonder how these new seatback protectors attach? Possibly the same 3m velcro to the leather. Also says shipping is delayed by 2 weeks.

 

[theadonnan]

So far this one has done an ok job. Enough material in all dimensions.
https://amzn.to/3S4VWjo

Sponsored