Introducing RMaxx Running Boards & Rock Sliders for Rivian R1T / R1S from Team 1EV

[Desiboy]

EV Sportline, any recommendations for an installer in the Phoenix area?

Sponsored

 

[Canthoney]

Got them installed this weekend thanks to some help from a friend. They look great!

 

[OverZealous]

Got them installed this weekend thanks to some help from a friend. They look great!

Which method did you go with for attaching? It looks like you removed the panels, did you leave them off, or cut slots in them?

Also, did you have any trouble removing the panels? While I have 4" grommets on the way, I'm still debating if I want to test them without cutting the panels first.

 

[Canthoney]

Which method did you go with for attaching? It looks like you removed the panels, did you leave them off, or cut slots in them?

Also, did you have any trouble removing the panels? While I have 4" grommets on the way, I'm still debating if I want to test them without cutting the panels first.

The panels were difficult to remove in a couple of areas, one side seemed to have adhesive on it, and one clip broke off. We ended up cutting L shaped slots in it to make work, we measured and traced where they would be underneath because the template I had wasn’t matching up.

 

[camaroz1985]

I saw this posted on FB but surprised i didn't see it posted here (unless i missed it but i've been following this thread pretty religiously so don't think i did). Cross posting for the group and for anyone who didn't see!

From Facebook:

Now THIS is how a Rivian Rock Slider should look

You’re looking at the RMaxx Rock Slider by 1EV - this is a pre-production sample. All the details are at Evsportline.com

Come on @EV Sportline you are holding out on us. We need our fix!!!

 

[Lizardo]

Guess mine arrive tomorrow. Unsure of any place local to install.

Will try myself.

Plan on leaving the panels unmodified.

 

[EV Sportline]

Got them installed this weekend thanks to some help from a friend. They look great!

Got a good little helper there!

 

[EV Sportline]

Come on @EV Sportline you are holding out on us. We need our fix!!!

We are on it! Still processing & managing some design refinements to make these the ultimate! This shown slider is actually an older prototype, many improvements made since this version

 

[Lizardo]

Received mine just now. Heavy box

Hopefully have time to try and put them on this week.

 

[hardrock197]

Received mine just now. Heavy box

Hopefully have time to try and put them on this week.

What was your order #?

 

[Lizardo]

low 2000s, don't know off the top of my head

 

[connoisseurr]

@EV Sportline I know I DM'd about step depth for sliders versus running boards, but do want this to be public info once available. Any updates on information regarding the fixed depth for sliders? Can you also share the depth range for running boards, to have as a comparison?

 

[Lizardo]

Anyone not cutting the panels with running boards?

 

[windblowlc]

Anyone not cutting the panels with running boards?

I think you'd be the very few if you decide not to do it. I'll be doing the 4" holes with the rubber plugs.

 

[Steve-hsv]

I will not be. Boards scheduled for delivery tomorrow.. my panels are already off and have been for about a month now. I plan on installing and leaving the panels off. I figure they are only there truly for aero purposes. I've not had anything come up yet.

Sponsored