Introducing RMaxx Running Boards & Rock Sliders for Rivian R1T / R1S from Team 1EV

[avigneault]

Welp, finally started to try and install it. Cut 1st of 8 4" holes. Tried to loosen the TP55 bolt... don't think I moved it.. Used friend's breaker bar, guessing it wasn't long enough, enough leverage?

Sure you were turning it in the correct direction?

Sponsored

 

[Lizardo]

Sure you were turning it in the correct direction?

Nope ?

 

[madgrey]

FYI. My TP55 bit is a 3/8 drive socket. No way can you break those frame bolts loose unless you add a 3/8 to 1/2 adapter and use a 1/2 drive breaker bar or long ratchet.

The TP55 that came with my order fits a 7/16 socket. I used a 1/2" impact to remove the bracket bolts.

 

[Lizardo]

Will hopefully try later today. Its out for delivery right now.

 

[Test Name]

Hmm, thought they were shipping out by order number. My order number is before yours and mine has not shipped yet.

good luck with that, apparently order numbers don't matter.

 

[teddyang]

good luck with that, apparently order numbers don't matter.

Before we make these claims can people be clear what they ordered? I have a way early order number being a day 1 order but i ordered sliders so of course later order numbers are going to ship before mine because the sliders aren't even being sent yet. I'm pretty sure their ordering system is sequential, agnostic of what is being ordered, so if you're complaining because you see earlier order numbers shipping AND you ordered the same product, ok sure complain, it's probably better to DM their customer service to find out what's going on, but hey to each their own.

At the end of the day, if you don't want to wait then cancel your order, otherwise just be patient and try to engage evsportline directly to try and resolve whatever issue there may be. Thanks!

 

[dleepnw]

Let's put to rest any concern about 'can jack pucks / jack access points' still be accessed? ABSOLUTELY YES:

is there a reason why you went with the round hole cutout instead of the slot method? i would think the slot method is preferred since it leaves a smaller opening for things to get into the panel.

 

[Mysta]

Hmm, thought they were shipping out by order number. My order number is before yours and mine has not shipped yet.

You respond which pattern you wanted?

 

[Mysta]

is there a reason why you went with the round hole cutout instead of the slot method? i would think the slot method is preferred since it leaves a smaller opening for things to get into the panel.

The main benefit is consistency.

 

[dleepnw]

The main benefit is consistency.

well, they are the professionals and they are installing so you'd think they could do it consistently. id understand if it was a DIY install.

 

[Mysta]

well, they are the professionals and they are installing so you'd think they could do it consistently. id understand if it was a DIY install.

I mean this person may have wanted circles? What does it matter?

 

[Test Name]

Before we make these claims can people be clear what they ordered? I have a way early order number being a day 1 order but i ordered sliders so of course later order numbers are going to ship before mine because the sliders aren't even being sent yet. I'm pretty sure their ordering system is sequential, agnostic of what is being ordered, so if you're complaining because you see earlier order numbers shipping AND you ordered the same product, ok sure complain, it's probably better to DM their customer service to find out what's going on, but hey to each their own.

At the end of the day, if you don't want to wait then cancel your order, otherwise just be patient and try to engage evsportline directly to try and resolve whatever issue there may be. Thanks!

just quoting a post made directly from EV Sports

Before we make these claims can people be clear what they ordered? I have a way early order number being a day 1 order but i ordered sliders so of course later order numbers are going to ship before mine because the sliders aren't even being sent yet. I'm pretty sure their ordering system is sequential, agnostic of what is being ordered, so if you're complaining because you see earlier order numbers shipping AND you ordered the same product, ok sure complain, it's probably better to DM their customer service to find out what's going on, but hey to each their own.

At the end of the day, if you don't want to wait then cancel your order, otherwise just be patient and try to engage evsportline directly to try and resolve whatever issue there may be. Thanks!

Hey, im just quoting evsportline, im not the one who overpromised and under delivered. I get it, they are doing the best they can. Eagerly awaiting delivery like everyone else.

 

[teddyang]

just quoting a post made directly from EV Sports

Hey, im just quoting evsportline, im not the one who overpromised and under delivered. I get it, they are doing the best they can. Eagerly awaiting delivery like everyone else.

like i said, you do you, if you wanna complain, complain, but it'd be helpful if you at least provide more data points like what you ordered, when, etc rather than just vague "whining" which may or may not help.

for example:
Order# 19xx on 11/10/2022
Sliders with triple slot cutout
opted for Van Nuys install

 

[Scoiatael]

You respond which pattern you wanted?

Yep. A while ago.

 

[Mysta]

Yep. A while ago.

Yeah I see you’re within 100 of them, that’s nothing. Could be a batch of triple vs squares, could be they printed out a stack of 100 invoices and they’re working through them top to bottom, I wouldn’t waste time worrying.

Sponsored