Question for anyone with the Proclip center dash mount

[SwampNut]

It's really not "center" in their photos. My question is whether it could be clipped into the actual center, over the screen, instead of the angled part of the dash.

Sponsored

 

[Oldsmobile_Mike]

Don't know anything about the product, but based on the instructions on their website I'm guessing "no"? ?

Good luck though. Have never heard of this one but hopefully some owners will chime in.

 

[SwampNut]

I did read it, and it's not clear. On a totally different vehicle it could indeed go in a lot of places but they showed it in one. Then provided a sticky to keep it from moving left/right.

 

[TexasB]

ProClip makes another mount that flexes into the space made by the wood trim to the left and right of the steering wheel. I bought one and I love it. I tried it on both sides and prefer it to the left of the wheel. I added a power receptacle using an OBD power adapter (available on Amazon) and then ran a power source to a MagSafe charger option on the ProClip. Works great, holds phone where you can see it (with optional extended mounting plate available from ProClip) and charges continuously.

www.amazon.com/gp/product/B08SGC4K9T/


www.proclipusa.com/products/213065-vertical-extension-plate


www.proclipusa.com/products/855822-rivian-angled-dash-mount

 

[SwampNut]

This is for a Carplay screen to go over the main screen. I have the phone mount on the left already. I can't find anything like the EV sportline carplay mount, which they won't sell separately without their very subpar CarPlay screen.

 

[sk8nsanta]

ProClip makes another mount that flexes into the space made by the wood trim to the left and right of the steering wheel. I bought one and I love it. I tried it on both sides and prefer it to the left of the wheel. I added a power receptacle using an OBD power adapter (available on Amazon) and then ran a power source to a MagSafe charger option on the ProClip. Works great, holds phone where you can see it (with optional extended mounting plate available from ProClip) and charges continuously.

www.amazon.com/gp/product/B08SGC4K9T/


www.proclipusa.com/products/213065-vertical-extension-plate


www.proclipusa.com/products/855822-rivian-angled-dash-mount

Can you take a picture of your setup from the drivers view? Also could you share the dimensions of the angled mount faceplate? I was thinking of using the same proclip mount on the left, and then stick the Peak Design wall mount to it for a super clean (non-charging) option to mount to the left of the wheel.

https://www.peakdesign.com/collections/mobile/products/wall-mount

 

[Daspes]

Would this work?

https://www.thingiverse.com/thing:6475099

 

[SwampNut]

Would this work?

https://www.thingiverse.com/thing:6475099

Maybe, and good find, thanks. It says it's incomplete, and I can see one definite difference between it and the existing product. The vertical parts are at a 90 degree angle on this, and the EV Sportline bracket has a slight angle. But worth a print to try it.

 

[Daspes]

I’m at work right now so I just skimmed his description. It did say that it was based of the bracket on Amazon. Maybe a search there is a complete bracket. If you search thingverse there maybe other ones that could work. I stopped at the first result that I saw.

 

[SwampNut]

I’m at work right now so I just skimmed his description. It did say that it was based of the bracket on Amazon. Maybe a search there is a complete bracket. If you search thingverse there maybe other ones that could work. I stopped at the first result that I saw.

I'll try again since things could change daily, but I've spent over an hour trying to find something like this ready to use.

Sponsored