Customizable Console Organizer (3D Print)

[windblowlc]

Look what I’ve got…

Perfect in every way!! Thanks Todd!
I’m in love with these accessories.

Sponsored

 

[windblowlc]

I love how the base basket is indented to make room for the Rivian booklet underneath. Didn't have to move my Samsung SSD either - it's right on top of the booklet. My usb c adapter fits perfectly under the left elbow, also.

 

[windblowlc]

 

[windblowlc]

I put the two strips of foam tape Todd gave me under the 2 sides of the top basket and it sticks like glue to the base basket. Can’t say enough how good these are!

 

[windblowlc]

Beside the roses

 

[blank_lemur]

My usb c adapter fits perfectly under the left elbow, also.

This makes me think it's not fully seated, then, as it's designed to sit directly on the angled front (where the usb ports are). Hm... I wonder if the design itself could have a channel for a cable to be routed like this ... I might have to play with that.

 

[windblowlc]

This makes me think it's not fully seated, then, as it's designed to sit directly on the angled front (where the usb ports are). Hm... I wonder if the design itself could have a channel for a cable to be routed like this ... I might have to play with that.

I'll check on this... I had put my finger underneath to make sure it didn't sit on the adapter when I dropped it in. I'll check on the cable.

 

[windblowlc]

This makes me think it's not fully seated, then, as it's designed to sit directly on the angled front (where the usb ports are). Hm... I wonder if the design itself could have a channel for a cable to be routed like this ... I might have to play with that.

I checked on the cable and indeed the basket was not fully seated. I rearranged the cable and now the basket is sitting down fully on the angled front. Thanks again!!

 

[blank_lemur]

I ended up using a different 90 adapter so it doesn’t block my other port.

 

[jeeden]

But wait... It comes in Rivian blue

My son printed it for me on his flashforces. The locks for the accessories are a little rough to engage, but love the design. The photos don't show the color well, it is a much brighter blue

Edit: additional photo on seat in natural light...

 

[blank_lemur]

Nice blue color!

 

[MitchIn3D]

If you have an A1 Mini, check Printables. Todd uploaded a version for us that works great. Look in the "experiments" folder

 

[Msg43]

Hi, Did you make a model with deeper lower tier or did you happen to make available the one you made with the Kleenex hole in it? Major thanks for sharing both of these and your amazing model!

 

[blank_lemur]

Hi, Did you make a model with deeper lower tier or did you happen to make available the one you made with the Kleenex hole in it? Major thanks for sharing both of these and your amazing model!

There's only one set of heights for this model. I have a variant (in the Experiments folder) that will fit on an A1 mini print bed, but the height of the base and upper tray are the same.

On one of my early posts, I showed a slicer picture where I played with the idea of cutting a hole in it for kleenex to sit directly under the base. I just did that directly in the slicer. If you wanted to modify it that way, you could do the same. Similarly, I have published STEP files for all of the models so you can pretty easily import that into your favorite modeling software and cut holes or whatever you wanted to do.

 

[Msg43]

Thanks for your quick response and awesome model.

Sponsored