pangpang77
Well-Known Member
- First Name
- Dan
- Joined
- Feb 22, 2022
- Threads
- 20
- Messages
- 172
- Reaction score
- 313
- Location
- New Jersey
- Vehicles
- 2022 Hyundai Ioniq 5, 2023 Chevy Bolt EUV Premier
- Occupation
- Systems Exec
- Thread starter
- #1
I was looking for a solution to protect the back of the third row seat backs as I need to move a digital piano and guitars every week that requires the 3rd row seats to be down. They sell the full floor liner, but I put the seats up and down so often the seat back solution would be better.
I ordered a set of these off Walmart.com:
https://3dmatsusa.com/products/seat...tback&_ss=e&_v=1.0&model=MjAyM0BSSVZJQU5AUjFT
I installed Velcro with adhesives on the top part so they are removable but will stay in place when the seats are up. The bottom part needs to be free moving since when the seats are up they need a place to go.
When seats are flat either with the slight bump or when the panel is moved up to provide a flat bed they work perfectly.
When the seats are up however the bottom part needs somewhere to go and it extrudes backward over the liner behind the 3rd row. It then just needs to be tucked in.
Here are some pics.
I ordered a set of these off Walmart.com:
https://3dmatsusa.com/products/seat...tback&_ss=e&_v=1.0&model=MjAyM0BSSVZJQU5AUjFT
I installed Velcro with adhesives on the top part so they are removable but will stay in place when the seats are up. The bottom part needs to be free moving since when the seats are up they need a place to go.
When seats are flat either with the slight bump or when the panel is moved up to provide a flat bed they work perfectly.
When the seats are up however the bottom part needs somewhere to go and it extrudes backward over the liner behind the 3rd row. It then just needs to be tucked in.
Here are some pics.
Sponsored