Prinsu Pro Roof Rack on R1S - install photos & review

[Nano]

I haven’t used them yet so don’t know.

Sponsored

 

[FooF]

Not sure what frontrunner uses but I detailed what I used on Overland Ruff Rax on this post scroll down to Sept30. SF Bay Area Rivian Club
I also show how I mounted the Racksbrax quick releases for the awning and shower.

 

[Polar]

Just another love for roof rack image - prior to red flag of course.

 

[Mr. Ham]

Nice. you guys are making the case for me to get a roof rack.

 

[Nano]

@Polar used all of the cross bars and I only used half as many to keep the sunroof as clear as possible. I also had PPF installed on the sides and rear since I know bins, lumber, etc will slide there and with the piano black showing every scratch I didn't want that.

 

[natedogg]

@Polar used all of the cross bars and I only used half as many to keep the sunroof as clear as possible. I also had PPF installed on the sides and rear since I know bins, lumber, etc will slide there and with the piano black showing every scratch I didn't want that.

You had PPF installed on the roof rack, or on the black trim parts of the car on the sides above the doors?

 

[Nano]

I put PPF on the piano black parts of the roof and rear hatch. I know from previous experience putting bins, lumber, etc they get scratched and piano black will show everything. Cost $600 at a local shop.

 

[theadonnan]

@Nano How high off the glass are the crossbars? A lot shorter than stock?

 

[Nano]

I just went and measured 1.125 in. From the middle of the glass to the bottom of the crossbar. I can still get a wash mit under it.

 

[Tango45]

I just mounted up a Rhino Rack Pioneer 5 Platform, 84" x 49" on the factory crossbars. Rhino Rack has a really nice military discount and I'm a cheap slut, so...

Going (RV) camping this week and to Outer Banks next week. Only thing really noteworthy is that I tried to go with the Rhino Rack HD mounting kit, but the brackets were too small and the bolts were impacting the crossbars. I designed and ordered larger brackets through SendCutSend and it all came together nicely (so far).

 

[Coffeebreak]

You got an awesome setup!! I see you have the RacksBrax HDs. Do you mind sharing what the other brackets and housings are on the rack? (circled in red) Thanks!

OverlandRuffRax is worth the extra $$

 

[FooF]

Here are some of the mounts that you highlighted in red and some you did not.

Flush folding maxtrax mounts.
https://piratecampco.com.au/product...hino-pioneer-rola?_pos=2&_sid=ef729a0f0&_ss=r

Folding rear awning brackets.
https://www.4x4modsaustralia.com.au/30-Second-Awning-30SECFB-Folding-Awning-Brackets-Pair
I use raxbrax XD quick releases on top of the folding brackets and remove the pivot bolt and upper part of the folding brackets when I am not using the awning. I also used some small 1010 extrusion under the folding brackets for extra beefiness.
XD Awning Quick Release Hitch
I used a 23zero 180R awning with tent sides
https://23zero.com/product/180-degree-awning-free-standing/
https://23zero.com/product/peregrine-180-r-w1/

I have a 23zero shower enclosure mounted on raxbrax hd quick releases
https://23zero.com/product/kestrel-vehicle-shower-tent-full-privacy-black/
XD Awning Quick Release Hitch

I use a waterport weekender mounted to studs that stay in place on the extrusion when I take off the nuts.
waterport weekender

I used to have a rhino rack so I modified some of the rhino rack gear to work with the overland ruff rax.

Rhino-Rack Aluminium Folding Ladder - RAFL​

RHORAFL​

Rhino-Rack Pioneer Ladder Mount - 43217​

RHO43217​

I modified the ladder mount and bolted to the side of the overland ruff rax to used when climbing the ladder and sliding the spare tire onto the roof.

Rhino-Rack Folding Ladder Bracket - RUFLB​

RHORUFLB​

I used a raxbrax hd to mount the folding ladder bracket to cary the ladder.
HD Awning Quick Release Hitch

Rhino-Rack Spare Wheel Holder - RSWH​

RHORSWH​

I used the spare wheel holder along with 2 ratchet straps to secure the tire to the rack.
https://solvefunction.com/shop/ols/products/heavy-duty-extrusion-tie-down

I have some small camera quick release mounts that I use to mount some claymore lights
Quick Release Plate, Camera Tripod Mount Arca Swiss QR Plate Fast Claw Clamp Compatible with Canon Sony Nikon Pentax DSLR/SLR /Zhiyun/Feiyu/DJI/Moza S (Camera)
Claymore [Ultra2 3.0] Medium Outdoor Portable Light IP65 with 11,600mAh Battery, USB-C Rechargeable, Power Bank Phone Charger, 3 Colors 1,200 Lumen Ou

Here are some pics of all the gear on the rack.

 

[Coffeebreak]

Wow, those are some clever combinations. Functional yet kick-ass looking. Thanks so much for sharing your setup and photos!!

Sponsored