Wiper refills OEM

[Voronbrg]

Ok. I purchased the refills from my Mazda dealership. Now, can someone explain how to remove the original rubbers from the frame? I put the vehicle in wiper service, I remove the frame from the arm. I don't see how the rubber refill comes off the blade. Thank you in advance

slide the rubber out along the tracks , replace and slide back in.

Sponsored

 

[Voronbrg]

Can you clarify which part number is for driver, passenger? I have an R1T so I’m wondering if your providing part number for an R1S for the rear wiper too. I have no rear wiper so I don’t want to order a part unnecessarily. Thank you.

No, theyre only for the fronts. I have a r1t as well.

 

[Voronbrg]

The Mitsuba part numbers
Driver side 24”: MOB2-S2-105 600mm
Passenger side 18”: MOB2-S2-085 450mm
https://www.amazon.com/gp/product/B00BFDG118/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
here’s a thread with similar parts discussion for silicone refills https://www.myg37.com/forums/genera...ne-wiper-inserts-for-the-oem-wiper-blade.html

https://www.myg37.com/forums/general-tech-questions/281604-wiper-refills-important-fact.html

Personally I will be trying these PIAA SMR600 and SMR450 https://amzn.asia/d/8VMtJKc

silicones may last longer and have wider temperature range but they tend to squeal without special coatings applied to the windshield. It's added effort to maintain a coating than replacing refills. hence why they aren't factory wipers.

 

[djsider2]

Did the rubber insert part numbers change to BDTS-67-333 & BDTT-67-333?

 

[primedir]

Thanks for posting this information. I picked up the blade inserts at my local Mazda dealer and swapped them into my R1T in about 10 minutes. Half the price of the Rivian replacements, much less material waste, and available the same day.

Mazda parts BBP2-67-333 and BHS3-67-333.

 

[swflor]

You can also get the Michelin Blades (frame and rubber) from Costco for around 8.99. Fit perfect and have lasted. I usually do new blades once a year to keep them in prime condition.

 

[dradam]

Anyone found an insert replacement for the rear wiper on the S ?

 

[UnsungZero_OldTimeAdMan]

Adding to thread... the OEM articulated frame can look dull from sun damage. Cerakote Trimcoat does a good job to restore and protect it. If you are replacing the rubber blades, it's a good time to clean and treat the frames.

Anyone found an insert replacement for the rear wiper on the S ?

I could be wrong, but I think width of blade refills are pretty much universal? It's the length that's important. If you know length of OEM blade, buy a couple refills in that length to try. Wouldn't hurt to measure width of original.

 

[TRap015]

I have been waiting for 2 years to see if anyone have done any refill for rear wiper. All I know it’s 10” for the rear

 

[FooF]

Any suggestions for silicone blades?

I have been using these for a couple of years and they are still working well.

Piaa 97060 24-Inch (600mm) ... Qty : 1

Piaa 97045 18-Inch (450mm) ... Qty : 1

 

[mudito]

I have been waiting for 2 years to see if anyone have done any refill for rear wiper. All I know it’s 10” for the rear

Don't have an R1S myself, but this one is the one I used in several vehicles https://amzn.to/4az2Syk

You can cut to whatever length you need it

 

[Yossarian]

Anyone have experience with the Aero Voyage blades? They were one of the brands recommended in a C&D review of wiper blades and come with a set of replacement blades, making their already modest $25 per pair price effectively half as much.

The Amazon website says that they don't fit Rivian, but it's hard to how that's possible. They are available as a standard J-hook attachment and in 24" and 18" lengths. Why wouldn't they fit? For the price, it seems like they'd be worth trying.

 

[Dave Cundiff]

I had an R1S rear wiper replaced at our Rivian Service Center. Reasonable price, no drama.

Best wishes!

 

[Mousetrap]

Reasonable price

Do you recall how much it was?

 

[Dave Cundiff]

Do you recall how much it was?

Only vaguely. Maybe $15 or so. Thanks!

Sponsored