Garage Remote Limitations

[Kenmecca]

Works on my gate at the office. It's very old with a 6 pin combo

Sponsored

 

[capercrew02]

Just picked up my R1S today and also have a Ghost Control gate opener. Has anyone figured out a solution? I saw briefly there may be a universal homelink opener that can be wired up in parallel inside the ghost control box, or possibly a new wifi module? I’m trying very hard to not keep the physical opener in the vehicle.

 

[Captblue]

I also have a Ghost opener, I keep emailing for the remote software to be updated. If you figure something let me know.

 

[groovyone789]

Anyone have an update on ghost controls? No luck for me

 

[Firewired]

I looked at this closely when I took delivery a year ago and saw that Rivian was supporting garage doors in the 300 MHz range but not in the 200 MHz range yet. I can't recall exactly what my gate is, but it was around 296 MHz. I looked up which transmitter/receiver that Rivian had selected, and it seemed to support both frequency ranges, so support should just be a limitation of software thankfully, so there is still hope. I called Rivian support and gave them the brand and frequency of my gate. I check it after updates hoping it is something they get to. I had the same issue with my first Tesla. Took them a while to incorporate my gate to be programmable.

 

[CodemanCMC]

Just posting here that my Linear Access Pro gate is “not currently supported” after spending 6+ hours over three calls with Rivian support. Had zero issues with my Tesla and several Ford Explorers. Annoying especially if it is just a software issue.

 

[R1S88]

I also have an unsupported Linear 318 mhz door that works on every other car I've ever tried. I'm still not sure if it's a hardware or software limitation. I have been through the submit a service claim with no resolution process.

 

[Christos]

Has anyone had luck with a 318 mhz door opener. Mine is a commercial application by overhead doors for my office building. It’s a simple remote with no rolling code

 

[R1S88]

No luck - I also have a simple 318 mhz remote with a binary 9-dip switch code

 

[Captblue]

Any word on Ghost Control Gate opener compatibility?

 

[R1S88]

Can anyone confirm whether or not 318mhz doors/gates work on Gen 2 R1?

 

[GJPoss]

Has anyone tried something like this?

 

[TexasCrane]

I can get it to read my 318mhz gate transmitter but it fails at the next step.

Just wanted to update that I was finally able to get my gate(s) paired with my R1T. What I ended up doing was buying one of these universal remotes from Amazon. I programmed it to open my gates. Then I used the new universal remote to program my R1T opener. For whatever reason, it liked the signal that it got from that remote better and it programmed the gates just fine.

 

[GJPoss]

Page 28 of the owner's manual has a list of manufacturers, but there's also a more specific list of models. I will try to find where I've seen it.

https://cgi.widen.net/s/vhqs66xrrp/arq_compatibility_chart_2022

 

[GJPoss]

Just wanted to update that I was finally able to get my gate(s) paired with my R1T. What I ended up doing was buying one of these universal remotes from Amazon. I programmed it to open my gates. Then I used the new universal remote to program my R1T opener. For whatever reason, it liked the signal that it got from that remote better and it programmed the gates just fine.

I bought the universal remote, successfully programmed and tested it, but could not get it to pair with my 2023 R1T.

Sponsored