StowNCharge by Adventure High Tech - Out Now!

[iforbes]

You should be able to check your current spot on the list if you visit the product page and login.

I pushed and did two batches last week (I believe about 26 units) because I wanted to get them in customers hands before I leave.

I am hesitant shipping out any more before I leave as they won't arrive in customers hands till after I'm gone. So, you'll see a big batch the week of July 9th. Sorry to disappoint!

What if we promise not to ask any troubleshooting questions till after you get back? ?

Enjoy your vacation!

Sponsored

 

[Mcdubjr]

A quick message to everyone who already has a StowNCharge or is about to install one:

A customer sent me a message and a video regarding the StowNCharge not lying completely flat at the front. It appears that the Rivian power plug was bunching up underneath, which prevented it from going flat. However, he managed to bundle it up and guide it into some of the available space. I also know that you can tuck some of the excess back into the center console. I'll add a note about this to my installation video.

 

[teddyang]

Obligatory install post! There was one hiccup that @Mcdubjr rectified right away. My unit shipped missing the charging interface (the part that plugs in between the car and the pucks). Thankfully these ship from OC and i'm in LA so it was dropped in the mail the same day I let mcdubjr know it was missing and i received it the next day. Worth every penny and the wrapping job tying it with twine was definitely above and beyond and a nice touch!

 

[Mcdubjr]

Obligatory install post! There was one hiccup that @Mcdubjr rectified right away. My unit shipped missing the charging interface (the part that plugs in between the car and the pucks). Thankfully these ship from OC and i'm in LA so it was dropped in the mail the same day I let mcdubjr know it was missing and i received it the next day. Worth every penny and the wrapping job tying it with twine was definitely above and beyond and a nice touch!

Thanks @teddyang! Looks great. Embarrassingly enough it’s the second time I’ve forgotten to include the charger. Need to get some procedures in place to not do that again!

 

[mzdds]

I am one of the beta testers and the unit has been outstanding for the last 2 months. Only recommendation for everyone is to get yourself a tube of Hillman Graphite Powder and spray a few puffs on both sides of the channel for the drawer and it will make it glide very smoothly and you will not meet any resistance when you reach the last 1/2 inch of closure. The Graphite Powder you can buy the key kiosk at Home Depot for $5.

 

[Mcdubjr]

I am one of the beta testers and the unit has been outstanding for the last 2 months. Only recommendation for everyone is to get yourself a tube of Hillman Graphite Powder and spray a few puffs on both sides of the channel for the drawer and it will make it glide very smoothly and you will not meet any resistance when you reach the last 1/2 inch of closure. The Graphite Powder you can buy the key kiosk at Home Depot for $5.

Thanks for the advice, I will try it out.

Also, I did make a small modification after the first ~10 units to try and get smoother sliding (added a little more clearance to the lids). I could see graphite making it even nicer.

 

[Soju1]

I’ve had mine for a week or so and I’m super happy with it. I added a thin Velcro under the front area to allow it to stick down better than just relying on the friction hold. I usually use my phone mount on the dash but the wife places her phone here and it charges every time without issue. She’s also likes the way this looks vs the others out there.

 

[Rob O]

Installing mine today. Unfortunately, one of the two USB-C ports on the module for mine isn't delivering power. I emailed @Mcdubjr and he responded almost immediately, even though he's on vacation, and offered to send a replacement module once he's back. Excellent customer service.

Great product too ... really well thought out and looks factory once installed. The larger stowage area (compared with the "crumb gutter" on the factor pad) is also very useful. Fit and finish is excellent and it installs very securely (have seen others mention additional adhesion for the front section). The lid on mine also glides nice and smooth when opening/closing; no excessive friction or sticking but also not so loose it just slides open.

Install is pretty straight forward (couldn't be easier, really), and the install video makes it a total breeze.

At least upon initial install ... 5 Stars!

I usually use my phone mount on the dash but the wife places her phone here and it charges every time without issue. She’s also likes the way this looks vs the others out there.

Pretty much my exact situation. I will, at times, throw mine on the charging pad ... so this will still prove useful having two dedicated charges. Most times though, mine is on the dash mount so I can see the screen easily while driving and my wife uses the charging pad.

 

[Mcdubjr]

Installing mine today. Unfortunately, one of the two USB-C ports on the module for mine isn't delivering power. I emailed @Mcdubjr and he responded almost immediately, even though he's on vacation, and offered to send a replacement module once he's back. Excellent customer

Thanks Rob. I had a couple of people with the charging issue on one port. I’ve built little testing rig so I will check both ports from now on (previously I just tested for the power light). Hopefully that will reduce/eliminate these issues!

 

[CharonPDX]

It's been great for me so far with one addition - my wife's phone doesn't have MagSafe, so I slapped one of those silicone sticky mats on top to hold her phone in place while charging. MagSafe phones work perfectly as-is.

 

[Ngkgb]

Interesting phenomenon happening. I have installed the retrofit kit and it looks great. However, when I get back into my truck to leave for work, it takes about 5 minutes for my phone to start charging. It’s on the pad and attached to the MagSafe charger, but it takes a while before it actually starts to charge. My truck is usually sitting from 8 AM to 5 PM. Any thoughts? @Mcdubjr have you heard about this happening?

 

[Mcdubjr]

I’ve had this when my truck is in the sun. I believe the MagSafe are too hot and then it starts working after they cool when cabin temp comes down.

 

[Ngkgb]

I’ve had this when my truck is in the sun. I believe the MagSafe are too hot and then it starts working after they cool when cabin temp comes down.

Makes sense. Thank you for quick reply. Love the product.

 

[kpx110]

I am on the waiting list for this. Question for y’all…. If you install this, can you still thread a usb cable out from inside console?

 

[teddyang]

I am on the waiting list for this. Question for y’all…. If you install this, can you still thread a usb cable out from inside console?

yes you can

Sponsored