R1T Driver Seat Position

[tcsm]

Hey all!

Since the latest update I don't believe the drivers seat position goes all the way up like it use to.
I feel like I am leaning back while driving, and while the seat back comes up a tiny bit more, it wont let me save it to my profile.

However, I did notice the passenger seat back allows for it to be more upright than the drivers one.
Anyone else having this issue?

I have attached a photo showing the difference in the seat positions....you will notice that the drivers seat is not as far up as the passenger seat.
I have done a infosys reset, along with a full reset and no change.

Service ticket?

Thanks

Sponsored

 

[godfodder0901]

Hey all!

Since the latest update I don't believe the drivers seat position goes all the way up like it use to.
I feel like I am leaning back while driving, and while the seat back comes up a tiny bit more, it wont let me save it to my profile.

However, I did notice the passenger seat back allows for it to be more upright than the drivers one.
Anyone else having this issue?

I have attached a photo showing the difference in the seat positions....you will notice that the drivers seat is not as far up as the passenger seat.
I have done a infosys reset, along with a full reset and no change.

Service ticket?

Thanks

Likely needs to be recalibrated, and only service can do that now.

 

[Fozzy]

I had this exact issues appear recently. It gets progressively worse so don't recline the seat and expect it to go all the way back up. Neither a reboot or a sleep cycle helped for me.

 

[s4wrxttcs]

It gets progressively worse

This sounds fun.

Where do I sign up?

 

[ColoradoRivian]

Mobile service can do the re-calibration in less than 20 minutes.

 

[tcsm]

Got this done at the Service Center in 20 mins! Thanks everyone!

 

[Michaewh]

I have this same issue, but it only seems to be the last degree or so of angle that it won’t return to…

 

[Fozzy]

I have this same issue, but it only seems to be the last degree or so of angle that it won’t return to…

You can now perform the re-calibration procedure from the settings screen in the car.
From the June update notes:

You now have the ability to do it yourself by going to Settings › Vehicle › Service on the center display, selecting Driver Seat or Steering Wheel under Driver Position Calibration, and following the instructions on the screen. This returns calibration to the original factory settings and reinstates full range of motion.

 

[Michaewh]

You can now perform the re-calibration procedure from the settings screen in the car.
From the June update notes:

You now have the ability to do it yourself by going to Settings › Vehicle › Service on the center display, selecting Driver Seat or Steering Wheel under Driver Position Calibration, and following the instructions on the screen. This returns calibration to the original factory settings and reinstates full range of motion.

That did the trick, thank you!

Sponsored