Sponsored

Gen 1 R1T: 37K mile maintenance benchmark

EVTrukHog

Well-Known Member
First Name
Matt
Joined
Aug 31, 2021
Threads
37
Messages
666
Reaction score
1,018
Location
USA
Vehicles
R1T, C6 Corvette, Ford Explorer
This post is shared to provide a maintenance benchmark for other Gen 1 R1T owners. My R1T was born in September 2022 and just hit 37K miles. I have been experiencing a consistent "tocking" sound while driving at slow speeds, slow turns, speed bumps, etc... mobile tech (without benefit of a lift) diagnosed it as needing to have new Ting washers installed - which would require a trip to the Service Center.

Once at the Service Center, they found:
  • half shaft splines dry @ Left Front (remove and replace)
  • hub dry @ Left Front (remove and replace)
  • Drive Unit shaft seal leaking @ Right Front (drain/refill and replace seal)
My driving is almost 100% in All Purpose, Auto Height.

While at the service center, I did have them complete a comprehensive inspection, changed wiper blades, rotated tires, etc.. Overall, very pleased with the Service Center attention to detail and thoroughness. There does seem to be an unusual delay between the Service Center ordering parts and their arrival at the SC... not sure if this is due to supply chain logistics or availability, but it is creating a preventable bottleneck at the Service Center and undue loaner car expenses for Rivian. I would think they'd be better situated on this issue by now.

YMMV, but I'd suggest anyone that is in that 36K mile range to find a reason to get your vehicle on a lift at a Service Center for an inspection.
Sponsored

 

Deleted member 26425

Guest
I have not had my brake fluid flushed.
I believe that is a maintenance item every 36 months. I'm surprised they didn't suggest it. My R1T is coming up on 36 months in August so I'm expecting a brake fluid flush.
 
  • Like
Reactions: VSG

WhidbeyIsland

Well-Known Member
First Name
Jon
Joined
Mar 16, 2022
Threads
2
Messages
197
Reaction score
171
Location
Langley, WA
Vehicles
2023 R1T & 2026 Lexus NX350
Occupation
Retired!
My 2023 G1 Dual R1T with 24k miles is making the exact same "tocking" sounds from the front left drive axle (and getting louder every day it seems) and my SC appointment isn't until the end of August.. sigh.
 

Sponsored

Erik+

Well-Known Member
First Name
Erik
Joined
Sep 2, 2024
Threads
5
Messages
361
Reaction score
553
Location
Colorado
Vehicles
2023 R1T
Occupation
Engineering
The drive unit seal, particularly on the passenger side for some reason, is a known weak point. I noticed mine leaking a small bit when rotating tires back around 10k miles on my R1T. Mobile service was able to replace it, although we did have quite a bit disassembled in my garage to get it done. Likely depends on your proximity to a service center on what they are willing to undertake.

For those that rotate their own tires, doing a good inspection of all viewable components with the wheels off is good practice for catching things before they get worse.
 

aptmowe

Member
Joined
Apr 11, 2024
Threads
1
Messages
19
Reaction score
12
Location
Orange County
Vehicles
R1T
I believe that is a maintenance item every 36 months. I'm surprised they didn't suggest it. My R1T is coming up on 36 months in August so I'm expecting a brake fluid flush.
I was initially planning to have this done at my 3 year mark, but decided to wait a little longer since I have relatively low miles (23K). Although, not sure if miles or time dictates the need for this service.
 

Deleted member 26425

Guest
From my understanding, the fluid absorbs moisture and becomes less effective over time. I don't know that mileage matters.
 

ndmiller

Well-Known Member
First Name
Noah
Joined
Nov 19, 2023
Threads
15
Messages
1,386
Reaction score
1,734
Location
Atlanta
Vehicles
23 R1T Silver (The AG)
Occupation
Retailler
Clubs
 
From my understanding, the fluid absorbs moisture and becomes less effective over time. I don't know that mileage matters.
100% on the money. The addition of water to the brake fluid lowers its boiling point. After absorbing water BP drops by 100-150F which can add brake fade within a few hard stops. Braking system function is based on fluid being incompressible. When fluid goes to vapor all bets are off and so is braking performance.


Rivian R1T R1S Gen 1 R1T:  37K mile maintenance benchmark 1752162398329-ha
 

epowermarine

Well-Known Member
First Name
Todd
Joined
Sep 19, 2022
Threads
1
Messages
63
Reaction score
100
Location
South Florida
Vehicles
R1T
Thought I'd add another data point: Same age vehicle, delivered Sept 22, 38k miles. Needed half shalf lube/washers at about 15k, and 2 full front damper sets over the last 10k miles. On my 3rd windshield but blame that on a lot of Florida highway driving at 75mph. Was just in for service and asked them to change the brake fluid (it was almost like they had never heard that request before). Zero motor/battery/cooling problems, original 12v batts, love this beast.
 

Sponsored

OP
OP
EVTrukHog

EVTrukHog

Well-Known Member
First Name
Matt
Joined
Aug 31, 2021
Threads
37
Messages
666
Reaction score
1,018
Location
USA
Vehicles
R1T, C6 Corvette, Ford Explorer
Thought I'd add another data point: Same age vehicle, delivered Sept 22, 38k miles. Needed half shalf lube/washers at about 15k, and 2 full front damper sets over the last 10k miles. On my 3rd windshield but blame that on a lot of Florida highway driving at 75mph. Was just in for service and asked them to change the brake fluid (it was almost like they had never heard that request before). Zero motor/battery/cooling problems, original 12v batts, love this beast.
what was cost of the brake fluid flush/refill?
 

epowermarine

Well-Known Member
First Name
Todd
Joined
Sep 19, 2022
Threads
1
Messages
63
Reaction score
100
Location
South Florida
Vehicles
R1T
Correction/Remedy:
- Fluid, Brake, Bleed, 4 Calipers | Labor Code: 140050517 | 1.1 hr* | $242.00
Labor: Time (Hours): Labor Time Cost:
1.1 hr* $242.00
Pay Type:
Customer Pay
Sublet:
No
Discounts:
$0.00
Tax:
$16.94
*Overlapping labor time removed
Total
Amount:
$258.94
Service Center hourly rate: $220.00 (USD)
 

Jonger1150

Well-Known Member
First Name
Jon
Joined
Jun 28, 2024
Threads
4
Messages
1,023
Reaction score
962
Location
Howell, MI
Vehicles
2024 R1T & 2024 Chevy Blazer EV
Occupation
Nerd
Clubs
 
The half-shafts really need a grease fitting to allow injection of grease into the spline.
Sponsored

 
 








Top