Mirror "reverse to forward" not setting properly on 2025.18

[CharonPDX]

Since .18 installed, the "lower mirrors in reverse" doesn't reset to normal position when shifting into drive reliably.

Sometimes it works, sometimes it doesn't. It seems to be falling to reset to "forward" position more often than not more recently.

And using your driver profile "restore" doesn't fix it, it seems to think that the lowered position is "correct". But if I adjust the mirrors at all, then press "restore", it puts them in the correct profile position. Which makes the "must dig multiple taps deep to adjust mirrors" annoying when I did a quick 'back up and shift to drive and start driving in traffic' extremely annoying.

Opened a support ticket yesterday, haven't heard back yet.

Sponsored

 

[JamboF4]

Since .18 installed, the "lower mirrors in reverse" doesn't reset to normal position when shifting into drive reliably.

Sometimes it works, sometimes it doesn't. It seems to be falling to reset to "forward" position more often than not more recently.

And using your driver profile "restore" doesn't fix it, it seems to think that the lowered position is "correct". But if I adjust the mirrors at all, then press "restore", it puts them in the correct profile position. Which makes the "must dig multiple taps deep to adjust mirrors" annoying when I did a quick 'back up and shift to drive and start driving in traffic' extremely annoying.

Opened a support ticket yesterday, haven't heard back yet.

Yep, me too. After a few tries and a soft reset. I gave up and disabled it. Mirrors never came back to original position. Another cool idea that doesn’t work well and that I don’t really need. Oh well.

 

[Ruprecht]

Same happens to me occasionally. Keep us updated on what Rivian says.

 

[PhiltheCasual]

Same here, I disabled the feature for the time being.

Sponsored