RiDE Diagnostic Access

[Sgt Beavis]

Good Morning Everyone,
Does anyone have the code for getting into RiDE diagnostics? I need to run the window calibration on my driver’s door. To say the wind noise is excessive is a massive understatement.

Thanks,,,

Sponsored

 

[godfodder0901]

Good Morning Everyone,
Does anyone have the code for getting into RiDE diagnostics? I need to run the window calibration on my driver’s door. To say the wind noise is excessive is a massive understatement.
Thanks,,,

 

[Mellowyellow]

There aren't emojis on the Rivian keyboard /s

The last time I used it, it was 33748 (a long time ago). Not sure if they change it

 

[Sgt Beavis]

There aren't emojis on the Rivian keyboard /s

The last time I used it, it was 33748 (a long time ago). Not sure if they change it

I just ran it. 33748 still works.. Thx

 

[Sgt Beavis]

Minor followup. The calibration did the trick. Back to having a silent cabin..

 

[electruck]

Minor followup. The calibration did the trick. Back to having a silent cabin..

do we know what's different about this calibration than the one performed via the window switch?

 

[godfodder0901]

Sgt Beavis said:
Minor followup. The calibration did the trick. Back to having a silent cabin..
do we know what's different about this calibration than the one performed via the window switch?

You can do all four at the same time.

 

[Nixapatfan]

do we know what's different about this calibration than the one performed via the window switch?

Ride menu one works, the window switch one doesn't do anything.

 

[Sgt Beavis]

You can do all four at the same time.

yup, but I only needed the drivers window. It wasn't completely closing, leading to extremely loud wind noise.

 

[JoulesVerne]

yup, but I only needed the drivers window. It wasn't completely closing, leading to extremely loud wind noise.

Thanks for posting about this. I had a wind noise issue and tried calibrating the windows. It worked!

Then after looking through the RiDE menus, I found this issue. Anyone have any clue about it?

https://www.rivianforums.com/forum/threads/ride-diagnostics-red-for-rtm-and-vip-ecus.58742/

 

[csharp]

How do you get into the RiDE menu? I've seen people post about it, but never actually tried it.

 

[JoulesVerne]

 

[Mousetrap]

I wasn't going to start a separate thread, but it's related, so I'll jump in: this thread reminded me I was going to do the calibration to try to resolve the wind noise on my passenger side. When I did it (via RIDE), it popped up this message for a couple windows. No idea how to reset/fix it - I tried doing it via the individual window switches, but that didn't fix the message (it still popped up when I did another RIDE calibration).

Sponsored