Dimensions for Rivian Center Console Organizer?

[RexRemus]

Does anyone who might have purchased the console organizer from Rivian have the time to take a few measurements of it?

Mostly I am looking for the "height" like how tall it is, or really how deeply it goes down into the console. Actually, more specifically, is how much space there is below it. I want to know it if it will clear this: https://www.rivianforums.com/forum/threads/tesla-charging-adapter-dock-for-center-console.35215/

If it leaves enough space it would be ideal to fully utilize the center console in my setup. I just can't tell if it is intended to "fill" the console (sit on the bottom) or if it leaves space underneath, seems like it should leave some space under, I just need to know how much. Thanks!

Sponsored

 

[NDIrish]

I printed this... Can grab dimensions off the file. TinkerCad is simple and can read it

 

[RexRemus]

I printed this... Can grab dimensions off the file. TinkerCad is simple and can read it

Thanks! That's great. But ideally I'm still looking for the dimensions of the OEM organizer as I'd rather just buy that if possible and not have to worry about building/customizing/printing my own version.

If I need to go that route this model will definitely help, but I can just get the OEM version, I'd prefer that. I just need to know if that version will clear the charging adapters on the dock I made for them

 

[RexRemus]

Just to close this out and for anyone's future reference, I was able to get an answer over on the Rivian Discord:

Based on that info I think this will clear my adapter dock. I haven't had a chance to go measure myself IN the vehicle yet, but I know the highest part of my adapter dock is at about 5 1/2 inches tall so if it's 7" from the bottom to the bottom of the tray that means there should be room for the OEM organizer to sit above the dock. So this should mean you can get the "best of both worlds" as far as having the dock below and then nice easily accessible (and removed) storage on top of it.

Nice way to maximize utilization of the depth of that area

 

[CounterSeal]

Were you able to verify if this OEM center console organizer clears your USB dashcam drive setup? I think I also have almost the same setup with the same angled USB adapter. My concern is that the organizer would sit on the USB SD card adapter and put pressure on it.

 

[RexRemus]

Were you able to verify if this OEM center console organizer clears your USB dashcam drive setup? I think I also have almost the same setup with the same angled USB adapter. My concern is that the organizer would sit on the USB SD card adapter and put pressure on it.

I haven't yet. I was expecting to get it for xmas but it was still out of stock - it's IN stock now and I'd just buy it but my b-day is coming up and I don't want to take away a gift option from the person who was going to get it for xmas so... I'm kinda stuck waiting

 

[mzdds]

Mine clears my Samsung T7 SSD.

 

[doit82]

I haven't yet. I was expecting to get it for xmas but it was still out of stock - it's IN stock now and I'd just buy it but my b-day is coming up and I don't want to take away a gift option from the person who was going to get it for xmas so... I'm kinda stuck waiting

Mine also does not touch my right angled USB adapter.

 

[CounterSeal]

I haven't yet. I was expecting to get it for xmas but it was still out of stock - it's IN stock now and I'd just buy it but my b-day is coming up and I don't want to take away a gift option from the person who was going to get it for xmas so... I'm kinda stuck waiting

Ha, gotcha. I went ahead and ordered one. It seems like the clearance shouldn't be an issue since 7" from the bottom of the pit to the underside of the lower tray does give plenty of room for the angled adapter.

 

[Kelvn]

Anyone have measurements of organizer floor to armrest (when closed) want to see if there's at least 5.7" of clearance without the sliding portion.

And if someone is able to do measurements, if they can get the width too.

 

[123Dallas]

So does this mean that the Rivian console organizer essentially creates a three tier storage (2 tiers from the organizer and the one from bottom of center console to bottom of the organizer)?

 

[blank_lemur]

So does this mean that the Rivian console organizer essentially creates a three tier storage (2 tiers from the organizer and the one from bottom of center console to bottom of the organizer)?

Correct. You can see a lot of photos in this other thread where I created a 3D printed version. You can see comparison photos of the OEM one to my model here:

https://www.rivianforums.com/forum/threads/customizable-console-organizer-3d-print.37096/post-681516

 

[RexRemus]

Ok, finally got my unit in and I can confirm it fits over the charging adaptor dock that I designed (https://www.printables.com/model/1053871-tesla-charging-adapter-dock-for-rivian-center-cons)

It is a little snug to my memory card for drive cam, but I think it'll be ok

Sponsored