Affordable Winter Wheels Setup: Ram 2363

[oskeei]

So far as we know, its just those 2. They are essentially the same rim, just a different finish from the factory.

It appears the 2607 rim was a one year thing probably for some special edition Ram. My search yesterday resulted in finding the 2607 is more expensive and more rare (probably related). Your best bet will probably be in finding a 2363. Guessing all the Rivian folks are purchasing them up.

Look on eBay and see if there is someone local to you. Even if they have free shipping, ask them if they could offer lower price if you pick them up. Even if they have shipping listed, I'm sure they'll be happy to offer up a lower price to avoid the pain of shipping the heavy bulky rims. Also call around to junk yards in the area.

Sponsored

 

[shamoo]

For my set, I'm debating on NOT getting TMPS since it is for very occasional use.

Other than a possible warning light on my dash, is there anything else that would happen? I'm hoping it isn't a constant chime going off .

 

[nezha]

First of all, thank you for everyone's earlier help! I bought a set of used 2363. Now start looking for suitable center caps, and sorry for my dumb question.

From the link of the original post, ( https://www.amazon.com/dp/B09CPDQ672?ref_=cm_sw_r_apan_dp_9XS7Y13BEMX62Q7X6Z65 ), the center caps have an outer diameter of 63mm and assemble diameter of 56mm (55.5mm). OP also mentioned 63mm outer and 56mm inner.

Is 63/56mm the only size that will work on 2363 rims? The link is for ram 1500 rim hubs and allow me to select different sizes.

 

[oskeei]

From the link of the original post, ( https://www.amazon.com/dp/B09CPDQ672?ref_=cm_sw_r_apan_dp_9XS7Y13BEMX62Q7X6Z65 ), the center caps have an outer diameter of 63mm and assemble diameter of 56mm (55.5mm). OP also mentioned 63mm outer and 56mm inner.

Is 63/56mm the only size that will work on 2363 rims? The link is for ram 1500 rim hubs and allow me to select different sizes.
[/QUOTE]

Change size and you will see rim model will change. I think u can change the color/material, but that is size u need. I ordered from that same link and can validate fit.

 

[Riviot]

I purchased the wheels. Yes, please refer me to a powder coating place. Thank you!

PM sent

 

[Riviot]

First of all, thank you for everyone's earlier help! I bought a set of used 2363. Now start looking for suitable center caps, and sorry for my dumb question.

From the link of the original post, ( https://www.amazon.com/dp/B09CPDQ672?ref_=cm_sw_r_apan_dp_9XS7Y13BEMX62Q7X6Z65 ), the center caps have an outer diameter of 63mm and assemble diameter of 56mm (55.5mm). OP also mentioned 63mm outer and 56mm inner.

Is 63/56mm the only size that will work on 2363 rims? The link is for ram 1500 rim hubs and allow me to select different sizes.

That's the size that fits, I'd be cautious trying another. They're cheap and work well, if you are painting a different color then rattle can them. My powdercoat shop suggested that if they didn't match, but they were spot on to my wheels so no change necessary.

 

[Mattward439]

Hi: I am having difficulty getting used Ram 1500 "2363" wheels with the specific part number 1DZ12TRAMB. I see from recent posts that there may be other Ram 1500 "2363" part numbers that will work, like 1TQ79TRMAA. Can anyone provide a list of all known Ram 1500 "2363" part numbers that will clear the brake calipers?

So 1ub17trmac won't work??

 

[mpw81]

How about this one?

 

[Riviot]

So 1ub17trmac won't work??

I have no idea what those numbers mean and a quick DuckDuckGo links some shady websites I'm not willing to click on. Please provide a pic, like the fellow below

How about this one?

 

[Mattward439]

I have no idea what those numbers mean and a quick DuckDuckGo links some shady websites I'm not willing to click on. Please provide a pic, like the fellow below

Here are two with the 1ub17trmac part number. They "look" like the 1dz12tramb but looks can be deceiving.

 

[shamoo]

Those two pictured above will NOT work. They are not the correct wheel. Notice how the spokes are rounded and don’t extend flat toward the edge.

They are common Ram wheels but unfortunately not the ones you need.

 

[Franksmartin]

Did anyone ever confirm that the Dodge rims are designed to handle over 7,000lb? Personally I wouldn’t mount them as a Ram only weighs 4500.

 

[Riviot]

Here are two with the 1ub17trmac part number. They "look" like the 1dz12tramb but looks can be deceiving.

 

[bryanmtl]

Mission accomplished! Snow tires and matte black treatment coming soon.

 

[Polar]

And a set in Seattle for anyone looking over there, $350. Too rich for my cheap ass!
https://offerup.co/5IHKLNFwlEb

So these got snagged by another lucky PNW guy - @Riviot if you find anymore or want to ditch a spare set let me know. Been looking and tempted to try the steelies off amazon but would rather get some take off Ram rims for less.

Sponsored